1. Ethernet mini Jumbo Frames (2240 bytes) are used for FCoE encapsulation.

2. Both initiators and targets (native FCoE targets) must be on the same network.

?

?配置FCoE交換機端口：

? Spanning Tree Protocol(STP): Disabled

? LLDP: Enabled.

? PFC: AUTO.

? VLAN ID: Specify a VLAN dedicated to FCoE traffic. Do not mix FCoE traffic with other storage or data traffic because you need to take advantage of PFC.

For Software FCoE Adapter:

1. Create a vmkernel port group on new vSwitch

2. Create a separate vSwitch for each SW FCoE Adapter.

Note You can configure up to four SW FCoE adapters on a single vSphere 5 host.

Don’t get overzealous and attempt to guarantee FCoE bandwidth using Network I/O Control because it is already assigned the appropriate priority via the FCoE protocol. Doing so results in a negative effect and the FCoE traffic is stopped instead.

轉載于:https://blog.51cto.com/hj192837/1027077

總結

以上是生活随笔為你收集整理的VMware FCoE的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。