android流程化步骤样式,Android RecyclerView 解析之绘制流程篇
前言： 當前市場上有很多成熟的RecyclerView分析文章，但那始終是其他人總結出來的，還得自己動手分析，才知道自己理解了有多少，當然這個也算是加深對RecyclerView對理解吧；
官方簡介：A flexible view for providing a limited window into a large data set.
一種靈活的視圖，在有限的窗口，展示大量的數據集；
在開始之前，為了加深理解，我們需要帶著疑問進行閱讀；
(1)，RecyclerView是怎么加載數據的？
(2)，RecyclerView是怎么將View繪制到頁面上的？
(3)，RecyclerView是怎么復用item的？
1.1 總體結構
RecyclerView主體架構.png
由上圖可知，RecyclerView主要由這幾部分組成；那他們的關系是啥呢？ 具體是如何關聯的呢？且聽完細細道來！
數據層面：首頁RecyclerView需要將數據和view綁定起來，是通過Adapter加載ViewHolder來實現綁定數據的；
布局層面：RecyclerView的Item的布局是通過LayoutManager來進行布局的；
復用層面：LayoutManger從Recycler獲取item來進行復用；
總結：
1，Adapter：將數據轉化為RecyclerView可以識別的數據；
2，ViewHolder：將數據和item綁定起來；
3，LayoutManager：通過計算將Item布局到頁面中；
4，Recycler：復用機制，統一管理Item，用于復用；
5，ItemDecoration：繪制item的樣式；
1.2 具體流程：
1.2.1 RecyclerView 初始化流程
首先，先來看看RecyclerView 的初始化流程，先舉個簡單的例子；
//獲取RecyclerView 控件
RecyclerView recyclerView = (RecyclerView) findViewById(R.id.recyclerview);
//創建adapter
MyAdapter adapter = new MyAdapter(list);
//創建LayoutManager
LinearLayoutManager linearLayoutManager = new LinearLayoutManager(getContext());
//設置LayoutManager
recyclerView.setLayoutManager(linearLayoutManager);
//設置Adapter
recyclerView.setAdapter(adapter);
1，我們先來看看RecyclerView 的構造方法做了啥？
public RecyclerView(@NonNull Context context, @Nullable AttributeSet attrs, int defStyle) {
super(context, attrs, defStyle);
//創建觀察者
this.mObserver = new RecyclerView.RecyclerViewDataObserver();
//創建回收器
this.mRecycler = new RecyclerView.Recycler();
//創建布局信息保存類
this.mViewInfoStore = new ViewInfoStore();
this.mUpdateChildViewsRunnable = new Runnable() {
public void run() {
if (RecyclerView.this.mFirstLayoutComplete && !RecyclerView.this.isLayoutRequested()) {
if (!RecyclerView.this.mIsAttached) {
RecyclerView.this.requestLayout();
} else if (RecyclerView.this.mLayoutFrozen) {
RecyclerView.this.mLayoutWasDefered = true;
} else {
RecyclerView.this.consumePendingUpdateOperations();
}
}
}
};
...
if (attrs != null) {
TypedArray a = context.obtainStyledAttributes(attrs, CLIP_TO_PADDING_ATTR, defStyle, 0);
this.mClipToPadding = a.getBoolean(0, true);
a.recycle();
} else {
this.mClipToPadding = true;
}
...
this.mAccessibilityManager = (AccessibilityManager)this.getContext().getSystemService("accessibility");
this.setAccessibilityDelegateCompat(new RecyclerViewAccessibilityDelegate(this));
boolean nestedScrollingEnabled = true;
if (attrs != null) {
int defStyleRes = 0;
TypedArray a = context.obtainStyledAttributes(attrs, styleable.RecyclerView, defStyle, defStyleRes);
//從布局文件獲取Layoutmanger的名稱
String layoutManagerName = a.getString(styleable.RecyclerView_layoutManager);
int descendantFocusability = a.getInt(styleable.RecyclerView_android_descendantFocusability, -1);
if (descendantFocusability == -1) {
this.setDescendantFocusability(262144);
}
this.mEnableFastScroller = a.getBoolean(styleable.RecyclerView_fastScrollEnabled, false);
//通過layoutManger的名稱進行反射創建layoutManager，并設置給RecycleView
this.createLayoutManager(context, layoutManagerName, attrs, defStyle, defStyleRes);
...
} else {
this.setDescendantFocusability(262144);
}
//設置是否支持嵌套滾動，默認為true
this.setNestedScrollingEnabled(nestedScrollingEnabled);
}
從構造方法可以看出，里面做了一大堆初始化的操作，最主要看一下這個創建layoutManager的方法createLayoutManager()；
根據布局屬性進行反射來創建layoutManager；
private void createLayoutManager(Context context, String className, AttributeSet attrs, int defStyleAttr, int defStyleRes) {
if (className != null) {
className = className.trim();
if (!className.isEmpty()) {
className = this.getFullClassName(context, className);
try {
ClassLoader classLoader;
if (this.isInEditMode()) {
classLoader = this.getClass().getClassLoader();
} else {
classLoader = context.getClassLoader();
}
Class extends RecyclerView.LayoutManager> layoutManagerClass = classLoader.loadClass(className).asSubclass(RecyclerView.LayoutManager.class);
Object[] constructorArgs = null;
Constructor constructor;
try {
//通過反射創建布局構造器
constructor = layoutManagerClass.getConstructor(LAYOUT_MANAGER_CONSTRUCTOR_SIGNATURE);
constructorArgs = new Object[]{context, attrs, defStyleAttr, defStyleRes};
} catch (NoSuchMethodException var13) {
try {
constructor = layoutManagerClass.getConstructor();
} catch (NoSuchMethodException var12) {
var12.initCause(var13);
throw new IllegalStateException(attrs.getPositionDescription() + ": Error creating LayoutManager " + className, var12);
}
}
constructor.setAccessible(true);
//將創建出來的LayoutManger設置給RecycleView
this.setLayoutManager((RecyclerView.LayoutManager)constructor.newInstance(constructorArgs));
} catch (ClassNotFoundException var14) {
throw new IllegalStateException(attrs.getPositionDescription() + ": Unable to find LayoutManager " + className, var14);
} catch (InvocationTargetException var15) {
throw new IllegalStateException(attrs.getPositionDescription() + ": Could not instantiate the LayoutManager: " + className, var15);
} catch (InstantiationException var16) {
throw new IllegalStateException(attrs.getPositionDescription() + ": Could not instantiate the LayoutManager: " + className, var16);
} catch (IllegalAccessException var17) {
throw new IllegalStateException(attrs.getPositionDescription() + ": Cannot access non-public constructor " + className, var17);
} catch (ClassCastException var18) {
throw new IllegalStateException(attrs.getPositionDescription() + ": Class is not a LayoutManager " + className, var18);
}
}
}
}
再看一下setLayoutManager()這個方法里面做了啥操作？
public void setLayoutManager(@Nullable RecyclerView.LayoutManager layout) {
if (layout != this.mLayout) {
//停止當前的滾動操作
this.stopScroll();
if (this.mLayout != null) {
//判斷當前的layoutManager如果為空，則將該layoutManager的狀態進行初始化；
if (this.mItemAnimator != null) {
this.mItemAnimator.endAnimations();
}
this.mLayout.removeAndRecycleAllViews(this.mRecycler);
this.mLayout.removeAndRecycleScrapInt(this.mRecycler);
this.mRecycler.clear();
if (this.mIsAttached) {
this.mLayout.dispatchDetachedFromWindow(this, this.mRecycler);
}
this.mLayout.setRecyclerView((RecyclerView)null);
this.mLayout = null;
} else {
this.mRecycler.clear();
}
this.mChildHelper.removeAllViewsUnfiltered();
//將當前的layoutManager賦值給成員變量
this.mLayout = layout;
if (layout != null) {
if (layout.mRecyclerView != null) {
throw new IllegalArgumentException("LayoutManager " + layout + " is already attached to a RecyclerView:" + layout.mRecyclerView.exceptionLabel());
}
//將當前的RecyclerView賦值給layoutManager
this.mLayout.setRecyclerView(this);
if (this.mIsAttached) {
this.mLayout.dispatchAttachedToWindow(this);
}
}
//更新一下RecyclerView的緩存
this.mRecycler.updateViewCacheSize();
//觸發重新布局
this.requestLayout();
}
}
總結：看完RecyclerView的構造方法，里面主要是做了一些初始化的操作，并創建了layoutManager設置給RecyclerView(如果布局屬性有設置的話)；
2，看完了RecyclerView的setLayoutManager()的流程，我們繼續接著分析，看一下setAdapter()具體做了啥？
public void setAdapter(@Nullable RecyclerView.Adapter adapter) {
this.setLayoutFrozen(false);
//主要模塊
this.setAdapterInternal(adapter, false, true);
this.processDataSetCompletelyChanged(false);
this.requestLayout();
}
跟進源碼，我們主要分析setAdapterInternal()這個方法，讓我們看看這個源碼里面做了什么操作；
private void setAdapterInternal(@Nullable RecyclerView.Adapter adapter, boolean compatibleWithPrevious, boolean removeAndRecycleViews) {
if (this.mAdapter != null) {
//解注冊之前的數據觀察者
this.mAdapter.unregisterAdapterDataObserver(this.mObserver);
this.mAdapter.onDetachedFromRecyclerView(this);
}
if (!compatibleWithPrevious || removeAndRecycleViews) {
//進行初始化操作，初始化layoutManger，初始化mRecycler
this.removeAndRecycleViews();
}
this.mAdapterHelper.reset();
RecyclerView.Adapter oldAdapter = this.mAdapter;
//將adapter賦值給當前成員變量
this.mAdapter = adapter;
if (adapter != null) {
//adapter注冊數據觀察者，用于監聽數據的增刪改查
adapter.registerAdapterDataObserver(this.mObserver);
adapter.onAttachedToRecyclerView(this);
}
if (this.mLayout != null) {
this.mLayout.onAdapterChanged(oldAdapter, this.mAdapter);
}
this.mRecycler.onAdapterChanged(oldAdapter, this.mAdapter, compatibleWithPrevious);
this.mState.mStructureChanged = true;
}
這個方法里面主要是給adapter注冊數據監聽，用于數據的增刪改查的刷新，并做一些初始化的操作；
我們再看一下這個觀察者里面主要做了什么操作，具體的實現是在RecyclerViewDataObserver 這個類里面；
private class RecyclerViewDataObserver extends RecyclerView.AdapterDataObserver {
RecyclerViewDataObserver() {
}
public void onChanged() {
RecyclerView.this.assertNotInLayoutOrScroll((String)null);
RecyclerView.this.mState.mStructureChanged = true;
RecyclerView.this.processDataSetCompletelyChanged(true);
if (!RecyclerView.this.mAdapterHelper.hasPendingUpdates()) {
RecyclerView.this.requestLayout();
}
}
public void onItemRangeChanged(int positionStart, int itemCount, Object payload) {
RecyclerView.this.assertNotInLayoutOrScroll((String)null);
if (RecyclerView.this.mAdapterHelper.onItemRangeChanged(positionStart, itemCount, payload)) {
this.triggerUpdateProcessor();
}
}
public void onItemRangeInserted(int positionStart, int itemCount) {
RecyclerView.this.assertNotInLayoutOrScroll((String)null);
if (RecyclerView.this.mAdapterHelper.onItemRangeInserted(positionStart, itemCount)) {
this.triggerUpdateProcessor();
}
}
public void onItemRangeRemoved(int positionStart, int itemCount) {
RecyclerView.this.assertNotInLayoutOrScroll((String)null);
if (RecyclerView.this.mAdapterHelper.onItemRangeRemoved(positionStart, itemCount)) {
this.triggerUpdateProcessor();
}
}
public void onItemRangeMoved(int fromPosition, int toPosition, int itemCount) {
RecyclerView.this.assertNotInLayoutOrScroll((String)null);
if (RecyclerView.this.mAdapterHelper.onItemRangeMoved(fromPosition, toPosition, itemCount)) {
this.triggerUpdateProcessor();
}
}
void triggerUpdateProcessor() {
if (RecyclerView.POST_UPDATES_ON_ANIMATION && RecyclerView.this.mHasFixedSize && RecyclerView.this.mIsAttached) {
ViewCompat.postOnAnimation(RecyclerView.this, RecyclerView.this.mUpdateChildViewsRunnable);
} else {
RecyclerView.this.mAdapterUpdateDuringMeasure = true;
RecyclerView.this.requestLayout();
}
}
}
看到了我們很熟悉的方法，即adapter刷新數據所調用的方法；我們主要分析其中一個方法即可，讓我們來看一下onItemRangeChanged()這個方法；
這里面主要分為兩步：
public void onItemRangeChanged(int positionStart, int itemCount, Object payload) {
RecyclerView.this.assertNotInLayoutOrScroll((String)null);
//這里通過AdapterHelper將傳進來的信息保存起來
if (RecyclerView.this.mAdapterHelper.onItemRangeChanged(positionStart, itemCount, payload)) {
//重新布局
this.triggerUpdateProcessor();
}
}
(1)通過AdapterHelper將傳進來的信息保存起來；
boolean onItemRangeChanged(int positionStart, int itemCount, Object payload) {
if (itemCount < 1) {
return false;
} else {
this.mPendingUpdates.add(this.obtainUpdateOp(4, positionStart, itemCount, payload));
this.mExistingUpdateTypes |= 4;
return this.mPendingUpdates.size() == 1;
}
}
(2)通過triggerUpdateProcessor()方法觸發RecyclerView重新布局；
void triggerUpdateProcessor() {
if (RecyclerView.POST_UPDATES_ON_ANIMATION && RecyclerView.this.mHasFixedSize && RecyclerView.this.mIsAttached) {
//當前有動畫正在執行的時候會走這里
ViewCompat.postOnAnimation(RecyclerView.this, RecyclerView.this.mUpdateChildViewsRunnable);
} else {
//觸發重新布局
RecyclerView.this.mAdapterUpdateDuringMeasure = true;
RecyclerView.this.requestLayout();
}
}
1,RecyclerView的主要繪制流程；
2，復用機制；
2. 工作流程
2.1 主體關系
首先我們來看一下各個模塊的關系；
關系圖.png
通過上圖大體可以看出這幾個模塊的關系：
(1)RecyclerView通過LayoutManager來進行布局操作；
(2)LayoutManager從Recycler里面獲取復用的item來進行布局；
(3)Recycler管理著ViewHolder的創建與復用；
(4)Adapter將數據和ViewHolder綁定起來，并和RecyclerView注冊觀察者；
(5)RecyclerView通過ItemDecoration進行item樣式的繪制；
接下來通過源碼來細細剖析，看看具體是怎么實現的；
那么我們接著上面分析的setAdapter()方法繼續分析，在setAdapter()方法里，最后調用來requestLayout()，來觸發RecyclerView 的繪制流程；
這個requestLayout()這個方法最終會調用到ViewRootImp里面的requestLayout()方法；
public void requestLayout() {
if (!mHandlingLayoutInLayoutRequest) {
checkThread();
mLayoutRequested = true;
//觸發繪制流程
scheduleTraversals();
}
}
在ViewRootImp里調用requestLayout()方法進行繪制，我們主要看scheduleTraversals()方法，里面最終會調用到performTraversals()方法，源碼如下；
void scheduleTraversals() {
if (!mTraversalScheduled) {
mTraversalScheduled = true;
mTraversalBarrier = mHandler.getLooper().getQueue().postSyncBarrier();
mChoreographer.postCallback(
Choreographer.CALLBACK_TRAVERSAL, mTraversalRunnable, null);
if (!mUnbufferedInputDispatch) {
scheduleConsumeBatchedInput();
}
notifyRendererOfFramePending();
pokeDrawLockIfNeeded();
}
}
...
final class TraversalRunnable implements Runnable {
@Override
public void run() {
doTraversal();
}
}
final TraversalRunnable mTraversalRunnable = new TraversalRunnable();
...
void doTraversal() {
if (mTraversalScheduled) {
mTraversalScheduled = false;
mHandler.getLooper().getQueue().removeSyncBarrier(mTraversalBarrier);
if (mProfile) {
Debug.startMethodTracing("ViewAncestor");
}
performTraversals();
if (mProfile) {
Debug.stopMethodTracing();
mProfile = false;
}
}
}
...
performTraversals()這個方法里面執行了三大步驟，測量(measure)，布局(layout)，繪制(draw),完成的view的工作流程，將頁面繪制出來；
{
// cache mView since it is used so much below...
final View host = mView;
...
if (!mStopped || mReportNextDraw) {
//執行view的測量流程
performMeasure(childWidthMeasureSpec, childHeightMeasureSpec);
} else {
...
}
...
if (didLayout) {
//執行view的布局流程
performLayout(lp, mWidth, mHeight);
...
}
...
if (!cancelDraw && !newSurface) {
...
//執行view的繪制流程
performDraw();
} else {
...
}
}
從上面整理的方法來看，繪制流程主要是這performMeasure()，performLayout()，performDraw()；最終會觸發RecyclerView的onMeasure()，onLayout()，onDraw()方法，具體源碼這里就不過多分析了，感興趣的可以看一下View的繪制流程；
讓我們一個個來進行分析，先看看RecyclerView的onMeasure()方法里面做了什么？
onMeasure()分析：
protected void onMeasure(int widthSpec, int heightSpec) {
if (mLayout == null) {
//1.判斷當前的LayoutManger是否為空，為空則走RecyclerView默認測量的方法 ；
defaultOnMeasure(widthSpec, heightSpec);
return;
}
//2.LayoutManger開啟自動測量時走這里處理邏輯；
if (mLayout.mAutoMeasure) {
final int widthMode = MeasureSpec.getMode(widthSpec);
final int heightMode = MeasureSpec.getMode(heightSpec);
final boolean skipMeasure = widthMode == MeasureSpec.EXACTLY
&& heightMode == MeasureSpec.EXACTLY;
mLayout.onMeasure(mRecycler, mState, widthSpec, heightSpec);
if (skipMeasure || mAdapter == null) {
return;
}
if (mState.mLayoutStep == State.STEP_START) {
dispatchLayoutStep1();
}
// set dimensions in 2nd step. Pre-layout should happen with old dimensions for
// consistency
mLayout.setMeasureSpecs(widthSpec, heightSpec);
mState.mIsMeasuring = true;
dispatchLayoutStep2();
// now we can get the width and height from the children.
mLayout.setMeasuredDimensionFromChildren(widthSpec, heightSpec);
// if RecyclerView has non-exact width and height and if there is at least one child
// which also has non-exact width & height, we have to re-measure.
if (mLayout.shouldMeasureTwice()) {
mLayout.setMeasureSpecs(
MeasureSpec.makeMeasureSpec(getMeasuredWidth(), MeasureSpec.EXACTLY),
MeasureSpec.makeMeasureSpec(getMeasuredHeight(), MeasureSpec.EXACTLY));
mState.mIsMeasuring = true;
dispatchLayoutStep2();
// now we can get the width and height from the children.
mLayout.setMeasuredDimensionFromChildren(widthSpec, heightSpec);
}
} else {
//3.LayoutManger沒有開啟自動測量時走這里處理邏輯；
if (mHasFixedSize) {
mLayout.onMeasure(mRecycler, mState, widthSpec, heightSpec);
return;
}
// custom onMeasure
if (mAdapterUpdateDuringMeasure) {
eatRequestLayout();
onEnterLayoutOrScroll();
processAdapterUpdatesAndSetAnimationFlags();
onExitLayoutOrScroll();
if (mState.mRunPredictiveAnimations) {
mState.mInPreLayout = true;
} else {
// consume remaining updates to provide a consistent state with the layout pass.
mAdapterHelper.consumeUpdatesInOnePass();
mState.mInPreLayout = false;
}
mAdapterUpdateDuringMeasure = false;
resumeRequestLayout(false);
}
if (mAdapter != null) {
mState.mItemCount = mAdapter.getItemCount();
} else {
mState.mItemCount = 0;
}
eatRequestLayout();
mLayout.onMeasure(mRecycler, mState, widthSpec, heightSpec);
resumeRequestLayout(false);
mState.mInPreLayout = false; // clear
}
}
這里面主要分三種情況，而我們大部分情況都是走第三步，通過查看官方的LayoutManger的源碼得知，LinearLayoutManager和StaggeredGridLayoutManager都開啟了自動測試，而GridLayoutManager繼承自LinearLayoutManager；所以，官方的LayoutManager都開啟了自動測量，這里我們只需要關注第二步的邏輯；
從上面源碼可以看出，RecyclerView通過LayoutManger里的onMeasure()來進行測量操作；
通過State這個類來進行布局和測試狀態的記錄，這里的mLayoutStep 包括STEP_START、STEP_LAYOUT 、 STEP_ANIMATIONS三個狀態；
從源碼分析，此時測量完畢之后，判斷當前狀態為開始的時候(STEP_START)，調用了dispatchLayoutStep1()進行了一系列的操作，這個方法執行完了之后，會將mLayoutStep 賦值為STEP_LAYOUT；后面就執行了dispatchLayoutStep2()，在這個方法里將mLayoutStep 賦值為STEP_ANIMATIONS；
這里我們可以理解為，RecyclerView在測量完畢之后，就開始進行布局了，分別執行了dispatchLayoutStep1()和dispatchLayoutStep2()方法；到此onMeasure()分析完了；
讓我們繼續接著往下看，此時RecyclerView的onMeasure()已經執行完了，接下來會執行onLayout()方法，讓我們看看這個方法里面做了啥？
onLayout()分析：
先看一下源碼
protected void onLayout(boolean changed, int l, int t, int r, int b) {
TraceCompat.beginSection("RV OnLayout");
//執行布局操作
this.dispatchLayout();
TraceCompat.endSection();
this.mFirstLayoutComplete = true;
}
主要看dispatchLayout()這個方法
void dispatchLayout() {
if (mAdapter == null) {
Log.e(TAG, "No adapter attached; skipping layout");
// leave the state in START
return;
}
if (mLayout == null) {
Log.e(TAG, "No layout manager attached; skipping layout");
// leave the state in START
return;
}
mState.mIsMeasuring = false;
if (mState.mLayoutStep == State.STEP_START) {
dispatchLayoutStep1();
mLayout.setExactMeasureSpecsFrom(this);
dispatchLayoutStep2();
} else if (mAdapterHelper.hasUpdates() || mLayout.getWidth() != getWidth()
|| mLayout.getHeight() != getHeight()) {
// First 2 steps are done in onMeasure but looks like we have to run again due to
// changed size.
mLayout.setExactMeasureSpecsFrom(this);
dispatchLayoutStep2();
} else {
// always make sure we sync them (to ensure mode is exact)
mLayout.setExactMeasureSpecsFrom(this);
}
dispatchLayoutStep3();
}
通過上面源碼可以看出，之前在onMeasure()里的這個dispatchLayoutStep2()方法里面已經把mLayoutStep 賦值為STEP_ANIMATIONS，那么這里就會走最后一個方法dispatchLayoutStep3()；如果沒有執行STEP_START方法，那么就會依次執行dispatchLayoutStep1()，dispatchLayoutStep2()，dispatchLayoutStep3()這幾個布局方法；讓我們來一個個分析；
dispatchLayoutStep1():
private void dispatchLayoutStep1() {
mState.assertLayoutStep(State.STEP_START);
mState.mIsMeasuring = false;
eatRequestLayout();
mViewInfoStore.clear();
onEnterLayoutOrScroll();
processAdapterUpdatesAndSetAnimationFlags();
saveFocusInfo();
mState.mTrackOldChangeHolders = mState.mRunSimpleAnimations && mItemsChanged;
mItemsAddedOrRemoved = mItemsChanged = false;
mState.mInPreLayout = mState.mRunPredictiveAnimations;
mState.mItemCount = mAdapter.getItemCount();
findMinMaxChildLayoutPositions(mMinMaxLayoutPositions);
if (mState.mRunSimpleAnimations) {
// Step 0: Find out where all non-removed items are, pre-layout
int count = mChildHelper.getChildCount();
for (int i = 0; i < count; ++i) {
final ViewHolder holder = getChildViewHolderInt(mChildHelper.getChildAt(i));
if (holder.shouldIgnore() || (holder.isInvalid() && !mAdapter.hasStableIds())) {
continue;
}
final ItemHolderInfo animationInfo = mItemAnimator
.recordPreLayoutInformation(mState, holder,
ItemAnimator.buildAdapterChangeFlagsForAnimations(holder),
holder.getUnmodifiedPayloads());
mViewInfoStore.addToPreLayout(holder, animationInfo);
if (mState.mTrackOldChangeHolders && holder.isUpdated() && !holder.isRemoved()
&& !holder.shouldIgnore() && !holder.isInvalid()) {
long key = getChangedHolderKey(holder);
// This is NOT the only place where a ViewHolder is added to old change holders
// list. There is another case where:
// * A VH is currently hidden but not deleted
// * The hidden item is changed in the adapter
// * Layout manager decides to layout the item in the pre-Layout pass (step1)
// When this case is detected, RV will un-hide that view and add to the old
// change holders list.
mViewInfoStore.addToOldChangeHolders(key, holder);
}
}
}
if (mState.mRunPredictiveAnimations) {
// Step 1: run prelayout: This will use the old positions of items. The layout manager
// is expected to layout everything, even removed items (though not to add removed
// items back to the container). This gives the pre-layout position of APPEARING views
// which come into existence as part of the real layout.
// Save old positions so that LayoutManager can run its mapping logic.
saveOldPositions();
final boolean didStructureChange = mState.mStructureChanged;
mState.mStructureChanged = false;
// temporarily disable flag because we are asking for previous layout
mLayout.onLayoutChildren(mRecycler, mState);
mState.mStructureChanged = didStructureChange;
for (int i = 0; i < mChildHelper.getChildCount(); ++i) {
final View child = mChildHelper.getChildAt(i);
final ViewHolder viewHolder = getChildViewHolderInt(child);
if (viewHolder.shouldIgnore()) {
continue;
}
if (!mViewInfoStore.isInPreLayout(viewHolder)) {
int flags = ItemAnimator.buildAdapterChangeFlagsForAnimations(viewHolder);
boolean wasHidden = viewHolder
.hasAnyOfTheFlags(ViewHolder.FLAG_BOUNCED_FROM_HIDDEN_LIST);
if (!wasHidden) {
flags |= ItemAnimator.FLAG_APPEARED_IN_PRE_LAYOUT;
}
final ItemHolderInfo animationInfo = mItemAnimator.recordPreLayoutInformation(
mState, viewHolder, flags, viewHolder.getUnmodifiedPayloads());
if (wasHidden) {
recordAnimationInfoIfBouncedHiddenView(viewHolder, animationInfo);
} else {
mViewInfoStore.addToAppearedInPreLayoutHolders(viewHolder, animationInfo);
}
}
}
// we don't process disappearing list because they may re-appear in post layout pass.
clearOldPositions();
} else {
clearOldPositions();
}
onExitLayoutOrScroll();
resumeRequestLayout(false);
mState.mLayoutStep = State.STEP_LAYOUT;
}
這個方法主要做了ViewHolder信息的保存，里面通過遍歷當前的子View，根據子view的位置信息創建ItemHolderInfo，并添加到 ViewInfoStore這個類里面進行保存；
看一下ItemHolderInfo這個類；
public static class ItemHolderInfo {
public int left;
public int top;
public int right;
public int bottom;
public ItemHolderInfo() {
}
...
public ItemHolderInfo setFrom(@NonNull RecyclerView.ViewHolder holder,
@AdapterChanges int flags) {
final View view = holder.itemView;
this.left = view.getLeft();
this.top = view.getTop();
this.right = view.getRight();
this.bottom = view.getBottom();
return this;
}
}
class ViewInfoStore {
private static final boolean DEBUG = false;
/**
* View data records for pre-layout
*/
@VisibleForTesting
final ArrayMap mLayoutHolderMap = new ArrayMap<>();
@VisibleForTesting
final LongSparseArray mOldChangedHolders = new LongSparseArray<>();
/**
* Clears the state and all existing tracking data
*/
void clear() {
mLayoutHolderMap.clear();
mOldChangedHolders.clear();
}
/**
* Adds the item information to the prelayout tracking
* @param holder The ViewHolder whose information is being saved
* @param info The information to save
*/
void addToPreLayout(RecyclerView.ViewHolder holder, RecyclerView.ItemAnimator.ItemHolderInfo info) {
InfoRecord record = mLayoutHolderMap.get(holder);
if (record == null) {
record = InfoRecord.obtain();
mLayoutHolderMap.put(holder, record);
}
record.preInfo = info;
record.flags |= FLAG_PRE;
}
}
通過源碼可以看出，在dispatchLayoutStep1()方法里會先遍歷子view，并創建ItemHolderInfo，然后再通過ViewInfoStore的addToPreLayout()的這個方法將ItemHolderInfo賦值給InfoRecord，再保存到mLayoutHolderMap這個集合里面；
下面我們再來分析一下dispatchLayoutStep2()這個方法里面做來啥？
dispatchLayoutStep2()：
private void dispatchLayoutStep2() {
private void dispatchLayoutStep2() {
startInterceptRequestLayout();
onEnterLayoutOrScroll();
mState.assertLayoutStep(State.STEP_LAYOUT | State.STEP_ANIMATIONS);
mAdapterHelper.consumeUpdatesInOnePass();
mState.mItemCount = mAdapter.getItemCount();
mState.mDeletedInvisibleItemCountSincePreviousLayout = 0;
// Step 2: Run layout
mState.mInPreLayout = false;
// 開始真正的去布局
mLayout.onLayoutChildren(mRecycler, mState);
mState.mStructureChanged = false;
mPendingSavedState = null;
// onLayoutChildren may have caused client code to disable item animations; re-check
mState.mRunSimpleAnimations = mState.mRunSimpleAnimations && mItemAnimator != null;
mState.mLayoutStep = State.STEP_ANIMATIONS;
onExitLayoutOrScroll();
stopInterceptRequestLayout(false);
}
}
通過上面的源碼可以看出，dispatchLayoutStep2()里面就開始真正的去布局了，通過onLayoutChildre()方法進行布局，具體的實現都在LayoutManager的子類里面；我們常用的LayoutManager基本上是LinearLayoutManager，那么這里我們具體來分析一下這個類里面是怎么實現的；
先看一下源碼：
public void onLayoutChildren(RecyclerView.Recycler recycler, RecyclerView.State state) {
...
final View focused = getFocusedChild();
if (!mAnchorInfo.mValid || mPendingScrollPosition != RecyclerView.NO_POSITION
|| mPendingSavedState != null) {
mAnchorInfo.reset();
// 獲取布局的錨點
updateAnchorInfoForLayout(recycler, state, mAnchorInfo);
mAnchorInfo.mValid = true;
} else if (focused != null && (mOrientationHelper.getDecoratedStart(focused)
>= mOrientationHelper.getEndAfterPadding()
|| mOrientationHelper.getDecoratedEnd(focused)
<= mOrientationHelper.getStartAfterPadding())) {
...
// 更新錨點信息
mAnchorInfo.assignFromViewAndKeepVisibleRect(focused, getPosition(focused));
}
//判斷是否是從后往前開始布局
if (mAnchorInfo.mLayoutFromEnd) {
...
//布局操作
fill(recycler, mLayoutState, state, false);
...
} else {
...
// fill towards end
fill(recycler, mLayoutState, state, false);
// fill towards start
fill(recycler, mLayoutState, state, false);
...
}
...
}
這里把代碼簡化了，我們只需要關注幾個重點的方法；這里的布局操作是，通過尋找布局的錨點(mAnchorInfo)，判斷是從后往前布局還是從前往后布局，然后調用fill()方法進行布局；
尋找布局的錨點是通過updateAnchorInfoForLayout(recycler, state, mAnchorInfo)這個方法
private void updateAnchorInfoForLayout(RecyclerView.Recycler recycler, RecyclerView.State state,
AnchorInfo anchorInfo) {
...
if (updateAnchorFromChildren(recycler, state, anchorInfo)) {
if (DEBUG) {
Log.d(TAG, "updated anchor info from existing children");
}
return;
}
...
}
這里我們只需要關注updateAnchorFromChildren這個方法，跟進去看一下具體做了什么；
private boolean updateAnchorFromChildren(RecyclerView.Recycler recycler,
RecyclerView.State state, AnchorInfo anchorInfo) {
if (getChildCount() == 0) {
return false;
}
final View focused = getFocusedChild();
if (focused != null && anchorInfo.isViewValidAsAnchor(focused, state)) {
anchorInfo.assignFromViewAndKeepVisibleRect(focused, getPosition(focused));
return true;
}
if (mLastStackFromEnd != mStackFromEnd) {
return false;
}
View referenceChild = anchorInfo.mLayoutFromEnd
? findReferenceChildClosestToEnd(recycler, state)
: findReferenceChildClosestToStart(recycler, state);
if (referenceChild != null) {
anchorInfo.assignFromView(referenceChild, getPosition(referenceChild));
...
}
return true;
}
return false;
}
從這里的源碼可以看出，先通過getFocusedChild()去獲取focused 這個view，當獲取到了的時候?qū)⑵錁?biāo)記為錨點，如果獲取不到那么就通過findReferenceChildClosestToEnd和findReferenceChildClosestToStart去尋找合適的view，并將其標記為錨點；
讓我們回到onLayoutChildren這個方法，當獲取到錨點的時候，調用fill方法開始填充頁面，根據fill方法看看具體做了什么？
int fill(RecyclerView.Recycler recycler, LayoutState layoutState,
RecyclerView.State state, boolean stopOnFocusable) {
...
if (layoutState.mScrollingOffset != LayoutState.SCROLLING_OFFSET_NaN) {
//回收沒有用到的view
recycleByLayoutState(recycler, layoutState);
}
...
while ((layoutState.mInfinite || remainingSpace > 0) && layoutState.hasMore(state)) {
layoutChunk(recycler, state, layoutState, layoutChunkResult);
...
}
}
這里通過recycleByLayoutState方法先將沒有用到view進行回收，然后再通過while循環調用layoutChunk方法進行布局；
看一下layoutChunk方法具體做了什么操作？
void layoutChunk(RecyclerView.Recycler recycler, RecyclerView.State state,
LayoutState layoutState, LayoutChunkResult result) {
View view = layoutState.next(recycler);
...
RecyclerView.LayoutParams params = (RecyclerView.LayoutParams) view.getLayoutParams();
if (layoutState.mScrapList == null) {
if (mShouldReverseLayout == (layoutState.mLayoutDirection
== LayoutState.LAYOUT_START)) {
addView(view);
} else {
addView(view, 0);
}
} else {
...
}
...
layoutDecoratedWithMargins(view, left, top, right, bottom);
...
}
到這里就是最終布局的地方了，先通過recycler獲取要布局的view，再通過addView方法將view添加到RecyclerView里去，然后根據參數調用layoutDecoratedWithMargins方法進行布局；
public void layoutDecoratedWithMargins(@NonNull View child, int left, int top, int right,
int bottom) {
final LayoutParams lp = (LayoutParams) child.getLayoutParams();
final Rect insets = lp.mDecorInsets;
child.layout(left + insets.left + lp.leftMargin, top + insets.top + lp.topMargin,
right - insets.right - lp.rightMargin,
bottom - insets.bottom - lp.bottomMargin);
}
這里最終調用了view的layout方法進行布局；到這里dispatchLayoutStep2()就分析完了，讓我們繼續接著看dispatchLayoutStep3()第三步里面做了啥；
dispatchLayoutStep3()：
private void dispatchLayoutStep3() {
mState.assertLayoutStep(State.STEP_ANIMATIONS);
...
mState.mLayoutStep = State.STEP_START;
if (mState.mRunSimpleAnimations) {
...
for (int i = mChildHelper.getChildCount() - 1; i >= 0; i--) {
ViewHolder holder = getChildViewHolderInt(mChildHelper.getChildAt(i));
if (holder.shouldIgnore()) {
continue;
}
long key = getChangedHolderKey(holder);
final ItemHolderInfo animationInfo = mItemAnimator
.recordPostLayoutInformation(mState, holder);
ViewHolder oldChangeViewHolder = mViewInfoStore.getFromOldChangeHolders(key);
...
if (oldDisappearing && oldChangeViewHolder == holder) {
// run disappear animation instead of change
mViewInfoStore.addToPostLayout(holder, animationInfo);
} else {
...
mViewInfoStore.addToPostLayout(holder, animationInfo);
...
}
} else {
mViewInfoStore.addToPostLayout(holder, animationInfo);
}
}
// Step 4: Process view info lists and trigger animations
//觸發動畫
mViewInfoStore.process(mViewInfoProcessCallback);
}
...
}
這個方法里面只需要關注addToPostLayout這個方法就行，這里和第一步類似，也是通過遍歷viewholder信息來創建ItemHolderInfo，并保存到mViewInfoStore里去；
看一下addToPostLayout這個方法做了啥？
void addToPostLayout(RecyclerView.ViewHolder holder, RecyclerView.ItemAnimator.ItemHolderInfo info) {
InfoRecord record = mLayoutHolderMap.get(holder);
if (record == null) {
record = InfoRecord.obtain();
mLayoutHolderMap.put(holder, record);
}
record.postInfo = info;
也是通過將ItemHolderInfo信息轉化為InfoRecord類，然后保存到集合里去(mLayoutHolderMap);
到此，RecyclerView的onLayout流程就已經走完了；那么接下來就要開始分析onDraw的流程了；
onDraw()分析
先看一下源碼；
public void draw(Canvas c) {
super.draw(c);
...
for (int i = 0; i < count; i++) {
mItemDecorations.get(i).onDrawOver(c, this, mState);
}
...
}
public void onDraw(Canvas c) {
super.onDraw(c);
final int count = mItemDecorations.size();
for (int i = 0; i < count; i++) {
mItemDecorations.get(i).onDraw(c, this, mState);
}
}
很簡單，就幾行，mItemDecorations這個集合里面存的是ItemDecoration，也就是說，RecyclerView的onDraw是用來繪制ItemDecoration的；而itemView的繪制是在ViewGroup里面；
至此，RecyclerView的onMeasure，onLayout，onDraw，流程就已經分析完畢了；
總結：
RecyclerView的布局流程比較復雜，但是還是遵循viewGroup的繪制原理，即onMeasure，onLayout，onDraw這幾步流程；
繪制流程.png
那么到這里，布局到流程就已經講完了，希望能對你有所幫助，后面會繼續分析RecyclerView的復用機制，敬請期待！
與50位技術專家面對面20年技術見證，附贈技術全景圖總結
以上是生活随笔為你收集整理的android流程化步骤样式,Android RecyclerView 解析之绘制流程篇的全部內容，希望文章能夠幫你解決所遇到的問題。
- 上一篇： 红芹菜的功效与作用、禁忌和食用方法
- 下一篇： 什么是病毒载量