修復文件/uboot/drivers/mtd/nand/nand_util.c文件如下代碼段

/* output progress message only at whole percent* steps to reduce the number of messages printed* on (slow) serial consoles*/if (percent != percent_complete) {percent_complete = percent;// printf("\rErasing at 0x%llx -- %3d%% complete.",printf("\rErasing at 0x%x -- %3d%% complete.",erase.addr, percent);if (opts->jffs2 && result == 0)printf(" Cleanmarker written at 0x%llx.",erase.addr);}

　　修復前

　　修復后

　　

轉載于:https://www.cnblogs.com/plinx/archive/2013/04/17/3025814.html

總結

以上是生活随笔為你收集整理的uboot nand erase 的显示错误修复的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。