ip配置方法是編輯sudo nano??/etc/network/interfaces

樹莓派默認配置

auto lo

iface lo inet loopback

iface eth0 inet dhcp

allow-hotplug wlan0

iface wlan0 inet manual

wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

iface default inet dhcp

修改為靜態ip的方法

1，老外的方法

sudo vi /etc/network/interfaces

To change to static IP address

cd /etc/networks

sudo nano interfaces

replace the line “iface eth0 inet dhcp” with

iface eth0 inet static

address 192.168.1.4

netmask 255.255.255.0

gateway 192.168.1.1

You should also take a look at the file /etc/resolv.conf

and check it has a nameserver entry (probably pointing at your default gateway) or direct to your ISP name servers.

nameserver 192.168.1.1

2.國內帖子

1.配置ip地址

編輯sudo nano??/etc/network/interfaces

自動獲取ip的配置：

auto eth0

allow-hotplug eth0

iface eth0 inet dhcp

手動配置ip：

auto eth0

iface eth0 inet static

address 192.168.1.7

netmask 255.255.255.0

gateway 192.168.0.254

2.配置DNS

編輯 sudo nano /etc/resolv.conf

domain lan

search lan

nameserver 192.168.1.1

nameserver 192.168.99.100

注：nameserver 后面的ip就是dns服務器，根據自己的運營商情況填吧

電腦與樹莓派網線直連

方案1：

on your pc

address 192.168.1.100

netmask 255.255.255.0

gateway 192.168.1.100

on your pi

/etc/network/interface

address 192.168.1.5

netmask 255.255.255.0

gateway 192.168.1.100

方案2：

Rpi

ip 172.16.1.1

mask 255.255.255.0

gateway 172.16.1.2 ?//172.16.1.1 works too

ubuntu

ip 172.16.1.21

sub 255.255.255.0

gateway 172.16.1.1 //172.16.1.10 works too

方案3：

That worked too.

Don't set the devices to be gateway for each other. All you need is something like this:

IP address of PC: 192.168.1.1

IP address of Rasperberry Pi: 192.168.1.2

Subnet mask on both: 255.255.255.0

Default gateway on both: 192.168.1.254

總結

以上是生活随笔為你收集整理的linux 静态配置多个ip,linux 配置静态IP的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。