windows 2003 server 使用cwrsync 3 同步文件夾后,權限和安全屬性不能同步,直接導致無法使用，查閱資料后發現必須在運行命令前使用SET CYGWIN=nontsec參數

將以下內容保存成.bat批處理文件后即可運行。

@ECHO OFF
SET CYGWIN=nontsec
"c:\Program Files\cwRsync\bin\rsync" -avrr /cygdrive/c/srcdir/ /cygdrive/d/dstdir/

對 于cwrsync 3.0.7以后及cwrsync 4.0以后的版本，由于cygwin已經從1.5升級到1.7，而且cygwin1.7的mount點從注冊表改成了/etc/fstab ，cwrsync 4.0.4版本使用CYGWIN=nontsec參數無效，仍然存在目錄權限問題，解決方法如下，在rsync.exe的上一級目錄新建一個etc目錄， 然后在etc目錄用寫字板新建一個fstab文件，不帶擴展名，文件內容為

#edit by gaodi?
#none /cygdrive cygdrive ntfs override,binary,noacl 0 0
none /cygdrive cygdrive binary,posix=0,user,noacl 0 0
C:/Program\040Files/cwrsync / ntfs override,binary,noacl 0 0
C:/Program\040Files/cwrsync/bin /usr/bin ntfs override,binary,noacl 0 0
#C:/Program\040Files/cwrsync/etc/terminfo /usr/share/terminfo ntfs override,binary,noacl 0 0

保存退出。

重新運行rsync.exe 執行同步后目錄就不會出現"權限順序不正確"的提示了。

(主要是第三行起作用，如果只加這一行一定要在最后加一個回車符)

附fstab文件的使用方法：

The Cygwin Mount Table

The /etc/fstab file is used to map Win32 drives and network shares into Cygwin's internal POSIX directory tree. This is a similar concept to the typical UNIX fstab file. The mount points stored in /etc/fstab are globally set for all users. Sometimes there's a requirement to have user specific mount points. The Cygwin DLL supports user specific fstab files. These are stored in the # #directory /etc/fstab.d and the name of the file is the Cygwin username of the user, as it's stored in the /etc/passwd file. The content of the user specifc file is identical to the system-wide fstab file.

The file fstab contains descriptive information about the various file systems. fstab is only read by programs, and not written; it is the duty of the system administrator to properly create and maintain this file. Each filesystem is described on a separate line; fields on each line are separated by tabs or spaces. Lines starting with '#' are comments.

The first field describes the block special device or remote filesystem to be mounted. On Cygwin, this is the native Windows path which the mount point links in. As path separator you MUST use a slash. Usage of a backslash might lead to unexpected results. UNC paths (using slashes, not backslashes) are allowed. If the path contains spaces these can be escaped as '\040'.

The second field describes the mount point for the filesystem. If the name of the mount point contains spaces these can be escaped as '\040'.

The third field describes the type of the filesystem. Cygwin supports any string here, since the file system type is usually not evaluated. The notable exception is the file system type cygdrive. This type is used to set the cygdrive prefix.

The fourth field describes the mount options associated with the filesystem. It is formatted as a comma separated list of options. It contains at least the type of mount (binary or text) plus any additional options appropriate to the filesystem type. Recognized options are binary, text, nouser, user, exec, notexec, cygexec, nosuid, posix=[0|1]. The meaning of the options is as follows.

acl?????? ?- Cygwin uses the filesystem's access control lists (ACLs) to
????????????? ?implement real POSIX permissions (default). This flag only
?????? ?affects filesystems supporting ACLs (NTFS) and is ignored
?????? ?otherwise.
auto????? ?- Ignored.
binary??? ?- Files default to binary mode (default).
cygexec?? ?- Treat all files below mount point as cygwin executables.
exec????? ?- Treat all files below mount point as executable.
noacl???? ?- Cygwin ignores filesystem ACLs and only fakes a subset of
?????? ?permission bits based on the DOS readonly attribute. This
?????? ?behaviour is the default on FAT and FAT32. The flag is
?????? ?ignored on NFS filesystems.
nosuid??? ?- No suid files are allowed (currently unimplemented).
notexec?? ?- Treat all files below mount point as not executable.
nouser??? ?- Mount is a system-wide mount.
override - Force the override of an immutable mount point (currently "/").
posix=0?? ?- Switch off case sensitivity for paths under this mount point.
posix=1?? ?- Switch on case sensitivity for paths under this mount point
?????? ?(default).
text????? ?- Files default to CRLF text mode line endings.
user????? ?- Mount is a user mount.

While normally the execute permission bits are used to evaluate executability, this is not possible on filesystems which don't support permissions at all (like FAT/FAT32), or if ACLs are ignored on filesystems supporting them (see the aforementioned acl mount option). In these cases, the following heuristic is used to evaluate if a file is executable: Files ending in certain extensions (.exe, .com, .bat, .btm, .cmd) are assumed to be executable. Files whose first two characters begin with '#!' are also considered to be executable. The exec option is used to instruct Cygwin that the mounted file is "executable". If the exec option is used with a directory then all files in the directory are executable. This option allows other files to be marked as executable and avoids the overhead of opening each file to check for a '#!'. The cygexec option is very similar to exec, but also prevents Cygwin from setting up commands and environment variables for a normal Windows program, adding another small performance gain. The opposite of these options is the notexec option, which means that no files should be marked as executable under that mount point.

A correct root directory is quite essential to the operation of Cygwin. A default root directory is evaluated at startup so a fstab entry for the root directory is not necessary. If it's wrong, nothing will work as expected. Therefore, the root directory evaluated by Cygwin itself is treated as an immutable mount point and can't be overridden in /etc/fstab... unless you think you really know what you're doing. In this case, use the override flag in the options field in the /etc/fstab file. Since this is a dangerous thing to do, do so at your own risk.

/usr/bin and /usr/lib are by default also automatic mount points generated by the Cygwin DLL similar to the way the root directory is evaluated. /usr/bin points to the directory the Cygwin DLL is installed in, /usr/lib is supposed to point to the /lib directory. This choice is safe and usually shouldn't be changed. An fstab entry for them is not required.

nouser mount points are not overridable by a later call to mount. Mount points given in /etc/fstab are by default nouser mount points, unless you specify the option user. This allows the administrator to set certain paths so that they are not overridable by users. In contrast, all mount points in the user specific fstab file are user mount points.

The fifth and sixth field are ignored. They are so far only specified to keep a Linux-like fstab file layout.

Note that you don't have to specify an fstab entry for the root dir, unless you want to have the root dir pointing to somewhere entirely different (hopefully you know what you're doing), or if you want to mount the root dir with special options (for instance, as text mount).

Example entries:

Just a normal mount point:

c:/foo /bar fat32 binary 0 0
A mount point for a textmode mount with case sensitivity switched off:

C:/foo /bar/baz ntfs text,posix=0 0 0
A mount point for a Windows directory with spaces in it:

C:/Documents\040and\040Settings /docs ext3 binary 0 0
A mount point for a remote directory without ACL support:

//server/share/subdir /srv/subdir smbfs binary,noacl 0 0
This is just a comment:

# This is just a comment
Set the cygdrive prefix to /mnt:

none /mnt cygdrive binary 0 0
Whenever Cygwin generates a Win32 path from a POSIX one, it uses the longest matching prefix in the mount table. Thus, if C: is mounted as /c and also as /, then Cygwin would translate C:/foo/bar to /c/foo/bar. This translation is normally only used when trying to derive the POSIX equivalent current directory. Otherwise, the handling of MS-DOS filenames bypasses the mount table.

If you want to see the current set of mount points valid in your session, you can invoking the Cygwin tool mount without arguments:

Example 3.1. Displaying the current set of mount points

bash$ mount
f:/cygwin/bin on /usr/bin type system (binary,auto)
f:/cygwin/lib on /usr/lib type system (binary,auto)
f:/cygwin on / type system (binary,auto)
e:/src on /usr/src type system (binary)
c: on /cygdrive/c type user (binary,posix=0,user,noumount,auto)
e: on /cygdrive/e type user (binary,posix=0,user,noumount,auto)

You can also use the mount command to add new mount points, and the umount to delete them. However, since they are only noted in memory, these mount points will disappear as soon as your last Cygwin process ends. See the section called 搈ount?and the section called 搖mount?for more information.

Note
When you upgrade an existing older Cygwin installation to Cygwin 1.7, your old system mount points (stored in the HKEY_LOCAL_MACHINE branch of your registry) are read by a script and the /etc/fstab file is generated from these entries. Note that entries for /, /usr/bin, and /usr/lib are never generated.

The old user mount points in your HKEY_CURRENT_USER branch of the registry are not used to generate /etc/fstab. If you want to create a user specific /etc/fstab.d/${USER} file from your old entries, there's a script available which does exactly that for you, bin/copy-user-registry-fstab. Just start the script and it will create your user specific fstab file. Stop all your Cygwin processes and restart them, and you can simply use your old user mount points as before.

本文轉自gaodi2002 51CTO博客，原文鏈接:http://blog.51cto.com/gaodi2002/1618144

總結

以上是生活随笔為你收集整理的windows 2003 server 使用cwrsync同步文件夹的权限问题的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。