三層以太網通道

interface FastEthernet0/19
?no switchport
?no ip address
?channel-protocol lacp
?channel-group 30 mode active
!
interface FastEthernet0/20
?no switchport
?no ip address
?channel-protocol lacp
?channel-group 30 mode active
interface Port-channel30
?no switchport
?ip address 10.1.1.1 255.255.255.0

SW2#ping 10.1.1.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.2, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/1 ms

interface FastEthernet0/19
?no switchport
?no ip address
?channel-protocol lacp
?channel-group 30 mode active
!
interface FastEthernet0/20
?no switchport
?no ip address
?channel-protocol lacp
?channel-group 30 mode active

interface Port-channel30
?no switchport
?ip address 10.1.1.2 255.255.255.0

查看狀態

SW3#show etherchannel summary
Flags:? D - down??????? P - in port-channel
??????? I - stand-alone s - suspended
??????? H - Hot-standby (LACP only)
??????? R - Layer3????? S - Layer2
??????? U - in use????? f - failed to allocate aggregator
??????? u - unsuitable for bundling
??????? w - waiting to be aggregated
??????? d - default port

Number of channel-groups in use: 1
Number of aggregators:?????????? 1

Group? Port-channel? Protocol??? Ports
------+-------------+-----------+-----------------------------------------------
30???? Po30(RU)??????? LACP????? Fa0/19(P)?? Fa0/20(P)

轉載于:https://blog.51cto.com/zhu224/673577

總結

以上是生活随笔為你收集整理的Etherchannel的配置 三层的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。