一個、通過命令，這是在以前的文章中所描述的命令：ifconfig

樣品演示：

[root@desktop40 ~]# ifconfig
br0 Link encap:Ethernet HWaddr 00:0C:29:4E:5B:F2
inet addr:192.168.1.131 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe4e:5bf2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3790 errors:0 dropped:0 overruns:0 frame:0
TX packets:386 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:504418 (492.5 KiB) TX bytes:36497 (35.6 KiB)

eth0 Link encap:Ethernet HWaddr 00:0C:29:4E:5B:F2
inet6 addr: fe80::20c:29ff:fe4e:5bf2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4402 errors:0 dropped:0 overruns:0 frame:0
TX packets:479 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:621826 (607.2 KiB) TX bytes:46191 (45.1 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:20 errors:0 dropped:0 overruns:0 frame:0
TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1168 (1.1 KiB) TX bytes:1168 (1.1 KiB)

virbr0 Link encap:Ethernet HWaddr 52:54:00:95:B7:E0
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:77 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:8195 (8.0 KiB)

vnet0 Link encap:Ethernet HWaddr FE:54:00:00:00:40
inet6 addr: fe80::fc54:ff:fe00:40/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:75 errors:0 dropped:0 overruns:0 frame:0
TX packets:3737 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:7098 (6.9 KiB) TX bytes:527403 (515.0 KiB)

[root@desktop40 ~]#

通過ifconfig，能夠查看到主機的全部的網絡信息。同一時候我們能夠在ifconfig命令后加網卡名字，得出對應的信息。

演示樣例二：

[root@desktop40 ~]# ifconfig br0
br0 Link encap:Ethernet HWaddr 00:0C:29:4E:5B:F2
inet addr:192.168.1.131 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe4e:5bf2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3946 errors:0 dropped:0 overruns:0 frame:0
TX packets:402 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:532753 (520.2 KiB) TX bytes:37642 (36.7 KiB)

[root@desktop40 ~]#

二、通過配置文件查看網絡信息

想要通過查看參數文件得到網絡配置的相關信息，我們就要知道這些參數文件在哪個文件夾下。

那么他們放在哪里呢？我們知道關于配置文件一般都放在/etc文件夾下，二網絡配置又屬于系統配置所以能夠定位它放置在/etc/sysconfig下，那么是關于網絡的。所以文件名稱中肯定包括network，從而能夠知道，配置文件放置在：/etc/sysconfig/network-scripts下。

以下我們看一看這么文件夾下都有哪些文件：

演示樣例三：

[root@instructor network-scripts]# ls
glsorig-ifcfg-eth0 ifcfg-lo ifdown-ippp ifdown-ppp ifup ifup-ippp ifup-plusb ifup-sit net.hotplug
ifcfg-br0 ifdown ifdown-ipv6 ifdown-routes ifup-aliases ifup-ipv6 ifup-post ifup-tunnel network-functions
ifcfg-br0:0 ifdown-bnep ifdown-isdn ifdown-sit ifup-bnep ifup-isdn ifup-ppp ifup-wireless network-functions-ipv6
ifcfg-eth0 ifdown-eth ifdown-post ifdown-tunnel ifup-eth ifup-plip ifup-routes init.ipv6-global

能夠看到在這個文件夾下有：ifcfg-br0 、ifcfg-eth0 都是關于網絡配置的參數文件，一個是關于橋接網卡一個是物理網卡。

我們來看一看這兩個演示樣例文件的內容：

演示樣例四：[root@desktop40 network-scripts]# cat ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="dhcp"
HWADDR="00:0C:29:4E:5B:F2"
IPV6INIT="yes"
MTU="1500"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE="Ethernet"
UUID="a6c176f0-6f6c-4629-92b5-f13c577d37cd"
DEVICE=eth0
BOOTPROTO=none
BRIDGE=br0
ONBOOT=yes
[root@desktop40 network-scripts]# cat ifcfg-br0
# Bridge Networking Interface
DEVICE=br0
ONBOOT=yes
BOOTPROTO=dhcp
TYPE=Bridge
USERCTL=yes
NM_CONTROLLED=no
IPV6INIT=no
PEERNTP=no
DELAY=0
NAME="Bridge eth0"
[root@desktop40 network-scripts]#

版權聲明：本文博客原創文章。博客，未經同意，不得轉載。

總結

以上是生活随笔為你收集整理的检查网络配置信息的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。