毫無疑問，bluetooth的打開是在Settings中進行的操作。因此，冤有頭，債有主，我們來到了Settings.java中，果然發現了相關的代碼如下：

mBluetoothEnabler =new BluetoothEnabler(context, new Switch(context));

于是，我們得以進入真正的藍牙操作的殿堂，好好進去看看吧。

1、BluetoothEnabler的構造函數public BluetoothEnabler(Context context,Switch switch_) {mContext = context;mSwitch = switch_;//很簡單了，去調用一個LocalBluetoothManager類的getInstance，其實會構造該類的 LocalBluetoothManager manager =LocalBluetoothManager.getInstance(context);if (manager == null) {// Bluetooth is not supported mLocalAdapter = null;mSwitch.setEnabled(false);} else {//構造成功后，通過manager得到bluetooth的adapter mLocalAdapter =manager.getBluetoothAdapter();}//同時新建一個intent，用于接收ACTION_STATE_CHANGED mIntentFilter = newIntentFilter(BluetoothAdapter.ACTION_STATE_CHANGED);}2、LocalBluetoothManager類的getInstancepublic static synchronizedLocalBluetoothManager getInstance(Context context) {if (sInstance == null) {//2.1同樣的，這個會去調用LocalBluetoothAdapter的getInstance，也會構造該類 LocalBluetoothAdapter adapter =LocalBluetoothAdapter.getInstance();if (adapter == null) {return null;}// This will be around as long asthis process is Context appContext =context.getApplicationContext();//2.2構造LocalBluetoothManager類 sInstance = newLocalBluetoothManager(adapter, appContext);}return sInstance;}2.1LocalBluetoothAdapter的getInstancestatic synchronized LocalBluetoothAdaptergetInstance() {if (sInstance == null) {//2.1.1通過BluetoothAdapter得到DefaultAdapter BluetoothAdapter adapter =BluetoothAdapter.getDefaultAdapter();if (adapter != null) {//2.1.2若有該DefaultAdapter，則構造LocalBluetoothAdapter sInstance = newLocalBluetoothAdapter(adapter);}}return sInstance;}2.1.1BluetoothAdapter得到DefaultAdapterpublic static synchronized BluetoothAdaptergetDefaultAdapter() {if (sAdapter == null) {IBinder b =ServiceManager.getService(BluetoothAdapter.BLUETOOTH_SERVICE);if (b != null) {IBluetooth service =IBluetooth.Stub.asInterface(b);sAdapter = newBluetoothAdapter(service);}}return sAdapter;}2.1.2構造LocalBluetoothAdapter//其實就是 mAdapter的初始化而已 privateLocalBluetoothAdapter(BluetoothAdapter adapter) {mAdapter = adapter;}2.2構造LocalBluetoothManager類//管理本地藍牙類，用來在藍牙API子類上面再封裝一個接口 privateLocalBluetoothManager(LocalBluetoothAdapter adapter, Context context) {mContext = context;//mLocalAdapter初始化為DefaultAdapter中得到的值 mLocalAdapter= adapter;//構造CachedBluetoothDeviceManager，用來管理遠程藍牙設備 mCachedDeviceManager = newCachedBluetoothDeviceManager(context);//2.2.1構建BluetoothEventManager，該類是用來管理廣播消息和回調函數的，即分發不同的消息去對UI進行處理 mEventManager = newBluetoothEventManager(mLocalAdapter,mCachedDeviceManager, context);//2.2.2該類提供對不同LocalBluetoothProfile object的訪問 mProfileManager = newLocalBluetoothProfileManager(context,mLocalAdapter,mCachedDeviceManager, mEventManager);}2.2.1構建BluetoothEventManagerBluetoothEventManager(LocalBluetoothAdapteradapter,CachedBluetoothDeviceManagerdeviceManager, Context context) {mLocalAdapter = adapter;mDeviceManager = deviceManager;//創建兩個IntentFilter mAdapterIntentFilter = newIntentFilter();//這里沒有對mProfileIntentFilter進行初始化，這個在LocalBluetoothProfileManager的addProfile中實現 mProfileIntentFilter = newIntentFilter();//創建一個Handler的Hash表 mHandlerMap = new HashMap<String,Handler>();mContext = context;//注冊對adapter和Device的幾個廣播消息的處理回調函數//add action到mAdapterIntentFilter// Bluetooth on/off broadcasts addHandler(BluetoothAdapter.ACTION_STATE_CHANGED, newAdapterStateChangedHandler());// Discovery broadcasts addHandler(BluetoothAdapter.ACTION_DISCOVERY_STARTED, newScanningStateChangedHandler(true));addHandler(BluetoothAdapter.ACTION_DISCOVERY_FINISHED, newScanningStateChangedHandler(false));addHandler(BluetoothDevice.ACTION_FOUND, new DeviceFoundHandler());addHandler(BluetoothDevice.ACTION_DISAPPEARED, newDeviceDisappearedHandler());addHandler(BluetoothDevice.ACTION_NAME_CHANGED, newNameChangedHandler());// Pairing broadcasts addHandler(BluetoothDevice.ACTION_BOND_STATE_CHANGED, newBondStateChangedHandler());addHandler(BluetoothDevice.ACTION_PAIRING_CANCEL, newPairingCancelHandler());// Fine-grained state broadcasts addHandler(BluetoothDevice.ACTION_CLASS_CHANGED, newClassChangedHandler());addHandler(BluetoothDevice.ACTION_UUID,new UuidChangedHandler());// Dock event broadcasts addHandler(Intent.ACTION_DOCK_EVENT,new DockEventHandler());//mAdapterIntentFilter的接收處理函數 mContext.registerReceiver(mBroadcastReceiver, mAdapterIntentFilter);}2.2.2構造LocalBluetoothProfileManager類LocalBluetoothProfileManager(Contextcontext,LocalBluetoothAdapter adapter,CachedBluetoothDeviceManagerdeviceManager,BluetoothEventManager eventManager){mContext = context;//各個類之間進行關聯 mLocalAdapter = adapter;mDeviceManager = deviceManager;mEventManager = eventManager;// pass this reference to adapter andevent manager (circular dependency) mLocalAdapter.setProfileManager(this);mEventManager.setProfileManager(this);ParcelUuid[] uuids =adapter.getUuids();// uuids may be null if Bluetooth isturned offif (uuids != null) {//假如已經有了uuid，根據uuid來add并new對應的profile，只針對A2DP,HFP,HSP,OPP四個profile，HID和PAN在下面，每次都add updateLocalProfiles(uuids);}// Always add HID and PAN profiles//加入HID和PAN兩個profile mHidProfile = new HidProfile(context,mLocalAdapter);addProfile(mHidProfile,HidProfile.NAME,BluetoothInputDevice.ACTION_CONNECTION_STATE_CHANGED);mPanProfile = new PanProfile(context);addPanProfile(mPanProfile,PanProfile.NAME,BluetoothPan.ACTION_CONNECTION_STATE_CHANGED);Log.d(TAG,"LocalBluetoothProfileManager construction complete");}好吧，其實我們被騙了，剛剛只是一個路引，不是真正的操作，真正的操作向來都是從你滑動界面那個on/off鍵開始的，因此我們決定把這個鍵的處理給揪出來。在Settings界面上一共就只有兩個on/off鍵，一個是wifi，另一個就是藍牙了，我們從這個代碼入手：case HEADER_TYPE_SWITCH://其實寫這個代碼的人也比較心虛，假如switch多一點，下面就要重寫了// Would need a differenttreatment if the main menu had more switchesif (header.id ==R.id.wifi_settings) {mWifiEnabler.setSwitch(holder.switch_);} else {//這個就是處理了，上面的路引沒有白做啊 mBluetoothEnabler.setSwitch(holder.switch_);}3、mBluetoothEnabler.setSwitch分析public void setSwitch(Switch switch_) {//若是和上次相同，則不做任何事情，可以理解，代碼也懶嘛if (mSwitch == switch_) return;//把上次的switch的changelistener清空 mSwitch.setOnCheckedChangeListener(null);mSwitch = switch_;//重設這次的switch的changelistener mSwitch.setOnCheckedChangeListener(this);int bluetoothState =BluetoothAdapter.STATE_OFF;//獲取getBluetoothState，這個過程也會同步一下state，防止改變if (mLocalAdapter != null)bluetoothState = mLocalAdapter.getBluetoothState();//根據狀態設置一下兩個標志位boolean isOn = bluetoothState ==BluetoothAdapter.STATE_ON;boolean isOff = bluetoothState ==BluetoothAdapter.STATE_OFF;//設置checked的狀態位。注意，假如這里狀態發生了改變，則會調用this.onCheckedChanged來進行處理 mSwitch.setChecked(isOn);if(WirelessSettings.isRadioAllowed(mContext, Settings.System.RADIO_BLUETOOTH)) {//有bluetooth或者不是airplane，則該switch不變灰，否則，灰的。 mSwitch.setEnabled(isOn || isOff);} else {mSwitch.setEnabled(false);}}4、onCheckedChanged在switch狀態發生改變后，會調用這個地方的回調函數進行處理。public void onCheckedChanged(CompoundButtonbuttonView, boolean isChecked) {// Show toast message if Bluetooth isnot allowed in airplane mode//若是打開的話，就需要檢查一下是否allow Bluetooth（radio，airplane的check）if (isChecked &&!WirelessSettings.isRadioAllowed(mContext,Settings.System.RADIO_BLUETOOTH)) {Toast.makeText(mContext,R.string.wifi_in_airplane_mode, Toast.LENGTH_SHORT).show();// Reset switch to off//若是不對的話，reset為off buttonView.setChecked(false);}if (mLocalAdapter != null) {//4.1設置scanmode，放心，它會判斷state的，不是STATE_ON，會直接返回false的 mLocalAdapter.setScanMode(BluetoothAdapter.SCAN_MODE_CONNECTABLE);//4.2使能或不使能Bluetooth了 mLocalAdapter.setBluetoothEnabled(isChecked);}//過程中還是會反灰，直到setBluetoothEnabled的結果返回會改變switch的狀態 mSwitch.setEnabled(false);}4.1設置scanmod會調用adapter中的setScanMode，直接去看就可以了，事實上就是設置了兩個property標志，沒什么public boolean setScanMode(int mode) {//這里把這個代碼寫出來就是證明一下，STATE_ON才會真正做下去，否則免談if (getState() != STATE_ON) returnfalse;//這里會調用對應server中的setScanModereturn setScanMode(mode, 120);}public synchronized boolean setScanMode(intmode, int duration) {//這里有個permission，好像和2.3中不一樣，注意一下 mContext.enforceCallingOrSelfPermission(android.Manifest.permission.WRITE_SECURE_SETTINGS,"NeedWRITE_SECURE_SETTINGS permission");boolean pairable;boolean discoverable;switch (mode) {case BluetoothAdapter.SCAN_MODE_NONE:pairable = false;discoverable = false;break;caseBluetoothAdapter.SCAN_MODE_CONNECTABLE://開始就是這里了，可pairable，但是不可discoverable pairable = true;discoverable = false;break;caseBluetoothAdapter.SCAN_MODE_CONNECTABLE_DISCOVERABLE:pairable = true;discoverable = true;if (DBG) Log.d(TAG, "BTDiscoverable for " + duration + " seconds");break;default:Log.w(TAG, "Requested invalidscan mode " + mode);return false;}//設置這兩個property標志 setPropertyBoolean("Discoverable", discoverable);setPropertyBoolean("Pairable", pairable);return true;}4.2setBluetoothEnabled分析public void setBluetoothEnabled(booleanenabled) {//根據enabled的標志設置是enable還是disable，在2.3中，這個地方就是bt_enable哦，這里還不知道，我們在第5步進行詳細的分析boolean success = enabled? mAdapter.enable(): mAdapter.disable();//成功了，設置對應的狀態位if (success) {setBluetoothStateInt(enabled?BluetoothAdapter.STATE_TURNING_ON:BluetoothAdapter.STATE_TURNING_OFF);} else {if (Utils.V) {Log.v(TAG,"setBluetoothEnabled call, manager didn't return " +"success forenabled: " + enabled);}//同步一下設置的狀態 syncBluetoothState();}}}5、mAdapter.enable或者mAdapter.disable就先分析enable吧，它會調用對應server端的enable(ture),我們來看看源碼public synchronized boolean enable(booleansaveSetting) {mContext.enforceCallingOrSelfPermission(BLUETOOTH_ADMIN_PERM,"Need BLUETOOTH_ADMIN permission");// Airplane mode can prevent Bluetoothradio from being turned on.//檢查是否是飛行模式if (mIsAirplaneSensitive &&isAirplaneModeOn() && !mIsAirplaneToggleable) {return false;}//5.1注意與2.3的不同，在2.3中，這里會調用enablethread去調用native的bt_enable，而4.0沒有這么做。沒事，我們來分析4.0怎么做的。 mBluetoothState.sendMessage(BluetoothAdapterStateMachine.USER_TURN_ON,saveSetting);return true;}5.1mBluetoothState.sendMessage簡單理解一下，mBluetoothState是BluetoothAdapterStateMachine類。因此，在分析的之前，簡單說一下，它其實就是類似一個狀態轉換圖，根據你所處于的狀態，然后再判斷收到的操作，進行不同的處理。根據構造函數中的setInitialState(mPowerOff);可以知道初始狀態是PowerOff。但是從它給出的狀態機可以看出，在PowerOff的狀態時，它是通過TURN_HOT/TURN_ON來改變到HotOff狀態的，然后才會收到USER_TURN_ON，去該變到BluetootOn的狀態。因此，可以肯定的是我們這里的USER_TURN_ON不是它收到的第一個message，因此我們?nèi)ゼm結一下它是從哪里開始改變PowerOff的狀態：extra1，然后再來看這里的處理吧：5.2。extra1、mAdapter.enable之前的狀態機轉變眾所周知，android在啟動之后會啟動一個serverThread的線程，通過這個線程會啟動一系列的服務。我們的藍牙服務也是在這里啟動的，android4.0其實在這個地方對狀態機進行了修改，我們來看一下源碼：該代碼位于framworks/base/services/java/com/android/server/systemserver.javaBluetoothServicebluetooth = null;BluetoothA2dpServicebluetoothA2dp = null;//模擬器上是不支持Bluetooth的，工廠測試模式也沒有Bluetooth（這個不了解）// Skip Bluetooth if we have anemulator kernel// TODO: Use a more reliable checkto see if this product should// support Bluetooth - see bug988521if(SystemProperties.get("ro.kernel.qemu").equals("1")) {Slog.i(TAG, "No BluetoohService (emulator)");} else if (factoryTest ==SystemServer.FACTORY_TEST_LOW_LEVEL) {Slog.i(TAG, "No BluetoothService (factory test)");} else {Slog.i(TAG, "BluetoothService");//新建Bluetoothservice，并把他加入到ServiceManager中 bluetooth = newBluetoothService(context);ServiceManager.addService(BluetoothAdapter.BLUETOOTH_SERVICE,bluetooth);//extra1.1在啟動Bluetooth服務后進行一些初始化，呵呵，這里就對狀態機進行了改變 bluetooth.initAfterRegistration();//新建了BluetoothA2dpService，并把之加入到了ServiceManager中 bluetoothA2dp= new BluetoothA2dpService(context, bluetooth);ServiceManager.addService(BluetoothA2dpService.BLUETOOTH_A2DP_SERVICE,bluetoothA2dp);//extra1.2同樣的要在之后做些init的工作 bluetooth.initAfterA2dpRegistration();//得到是否飛行int airplaneModeOn =Settings.System.getInt(mContentResolver,Settings.System.AIRPLANE_MODE_ON, 0);//看Bluetooth是否on，若是打開的狀態（沒有飛行），則這里會調用enable去打開int bluetoothOn =Settings.Secure.getInt(mContentResolver,Settings.Secure.BLUETOOTH_ON, 0);if (airplaneModeOn == 0&& bluetoothOn != 0) {bluetooth.enable();}}extra1.1initAfterRegistration分析public synchronized voidinitAfterRegistration() {//得到default的adapter mAdapter =BluetoothAdapter.getDefaultAdapter();//創建BluetoothAdapterStateMachine，初始化幾個狀態，并設初始狀態位POWEROFF,這里同時新建了一個EventLoop mBluetoothState = newBluetoothAdapterStateMachine(mContext, this, mAdapter);mBluetoothState.start();//根據這個xml的bool變量來決定是否先期TURN_HOT，該變量位于frameworks/base/core/res/res/values/config.xml中，默認為trueif (mContext.getResources().getBoolean(com.android.internal.R.bool.config_bluetooth_adapter_quick_switch)) {//extra1.2發送TURN_HOT的狀態變化message mBluetoothState.sendMessage(BluetoothAdapterStateMachine.TURN_HOT);}//得到對應的EventLoop mEventLoop =mBluetoothState.getBluetoothEventLoop();}extra1.2 TURN_HOT message的處理/*** Bluetooth module's power is off,firmware is not loaded.*/private class PowerOff extends State {@Overridepublic void enter() {if (DBG) log("Enter PowerOff:" + getCurrentMessage().what);}@Overridepublic boolean processMessage(Messagemessage) {log("PowerOff process message:" + message.what);boolean retValue = HANDLED;switch(message.what) {……case TURN_HOT://extra1.3這里就是我們尋找了千年的bt_enable所在的地方。我們?nèi)タ纯?/span>if (prepareBluetooth()) {//extra1.5轉變狀態到warmup，在prepareBluetooth真正完成后，這個狀態還會發生改變 transitionTo(mWarmUp);}break;……extra1.3prepareBluetooth分析看英文注釋就知道了，不解釋/*** Turn on Bluetooth Module, Loadfirmware, and do all the preparation* needed to get the Bluetooth Moduleready but keep it not discoverable* and not connectable.* The last step of this method sets upthe local service record DB.* There will be a event reporting thestatus of the SDP setup.*/private boolean prepareBluetooth() {//extra1.4首先還是調用了enableNative的本地方法，到這里你會發現終于和2.3相似了（不過請注意調用的時機不同了，這個在初始化，而2.3在界面的on/off滑動的時候），它還是會調用bt_enable，這個就會調用對應的set_bluetooth_power了if(mBluetoothService.enableNative() != 0) {return false;}// try to start event loop, give 2attempts//嘗試兩次去start event loopint retryCount = 2;boolean eventLoopStarted = false;while ((retryCount-- > 0)&& !eventLoopStarted) {mEventLoop.start();// it may take a moment for theother thread to do its// thing. Check periodically for a while.int pollCount = 5;while ((pollCount-- > 0)&& !eventLoopStarted) {if(mEventLoop.isEventLoopRunning()) {eventLoopStarted =true;break;}try {Thread.sleep(100);} catch(InterruptedException e) {log("prepareBluetooth sleep interrupted: " + pollCount);break;}}}//出錯處理if (!eventLoopStarted) {mBluetoothService.disableNative();return false;}// get BluetoothService ready//建立native data以及SDP相關的一些操作，這里將會產生PropertyChanged的UUIDs的signal，對該信號的處理會對狀態發生改變，詳細分析見extra1.5if(!mBluetoothService.prepareBluetooth()) {mEventLoop.stop();mBluetoothService.disableNative();return false;}//設置一個prepare的超時處理，在該時間內沒有收到UUID changed的signal將會進行錯誤處理 sendMessageDelayed(PREPARE_BLUETOOTH_TIMEOUT,PREPARE_BLUETOOTH_TIMEOUT_TIME);return true;}}extra1.4bt_enable分析intbt_enable() {LOGV(__FUNCTION__);int ret = -1;int hci_sock = -1;int attempt;//power的設置，on。不解釋，可加入對應板子的gpio口的處理，默認就只用了rfkill的處理if (set_bluetooth_power(1) < 0) gotoout;//開始hciattach服務，這個我們也做了修改，加入了rtk_h5 LOGI("Starting hciattachdaemon");if (property_set("ctl.start","hciattach") < 0) {LOGE("Failed to starthciattach");set_bluetooth_power(0);goto out;}// Try for 10 seconds, this can onlysucceed once hciattach has sent the// firmware and then turned on hci devicevia HCIUARTSETPROTO ioctlfor (attempt = 1000; attempt > 0; attempt--) {//創建hci_sock hci_sock = create_hci_sock();if (hci_sock < 0) goto out;//調用ioctl的HCIDEVUP，來判斷hciattach是否已經ok了。 ret = ioctl(hci_sock, HCIDEVUP,HCI_DEV_ID);LOGI("bt_enable: ret: %d, errno:%d", ret, errno);if (!ret) {break;} else if (errno == EALREADY) {LOGW("Bluetoothd alreadystarted, unexpectedly!");break;}close(hci_sock);//等待10 ms后再試一次 usleep(100000); // 100 ms retry delay }//10s都沒有搞定，需要做個失敗的處理if (attempt == 0) {LOGE("%s: Timeout waiting for HCIdevice to come up, error- %d, ",__FUNCTION__, ret);if (property_set("ctl.stop","hciattach") < 0) {LOGE("Error stoppinghciattach");}set_bluetooth_power(0);goto out;}//啟動bluetoothd服務 LOGI("Starting bluetoothddeamon");if (property_set("ctl.start","bluetoothd") < 0) {LOGE("Failed to startbluetoothd");set_bluetooth_power(0);goto out;}ret = 0;out://關閉hci_sockif (hci_sock >= 0) close(hci_sock);return ret;}extra 1.5 PropetyChanged的UUIDs的處理event_filter是用來對bluez的dbus的signal進行監聽的，有signal產生后，會在這里進行處理。因此，我們直接到這里看看該怎么處理。//Called by dbus during WaitForAndDispatchEventNative() staticDBusHandlerResult event_filter(DBusConnection *conn, DBusMessage *msg,void*data) {native_data_t *nat;JNIEnv *env;DBusError err;DBusHandlerResult ret;//err的一個初始化 dbus_error_init(&err);//得到參數 nat = (native_data_t *)data;nat->vm->GetEnv((void**)&env,nat->envVer);if (dbus_message_get_type(msg) !=DBUS_MESSAGE_TYPE_SIGNAL) {LOGV("%s: not interested (not asignal).", __FUNCTION__);returnDBUS_HANDLER_RESULT_NOT_YET_HANDLED;}LOGV("%s: Received signal %s:%s from%s", __FUNCTION__,dbus_message_get_interface(msg),dbus_message_get_member(msg),dbus_message_get_path(msg));env->PushLocalFrame(EVENT_LOOP_REFS);……//PropertyChanged這個signal的處理 } else if (dbus_message_is_signal(msg,"org.bluez.Adapter","PropertyChanged")) {//由msg解析參數 jobjectArray str_array =parse_adapter_property_change(env, msg);if (str_array != NULL) {/* Check if bluetoothd has(re)started, if so update the path. */jstring property =(jstring)env->GetObjectArrayElement(str_array, 0);const char *c_property =env->GetStringUTFChars(property, NULL);//檢查Property是否startedif (!strncmp(c_property,"Powered", strlen("Powered"))) {//若是powered，則看value是否是true，是ture就得到對應的path jstring value =(jstring)env->GetObjectArrayElement(str_array, 1);const char *c_value =env->GetStringUTFChars(value, NULL);if (!strncmp(c_value,"true", strlen("true")))nat->adapter =get_adapter_path(nat->conn);env->ReleaseStringUTFChars(value, c_value);}env->ReleaseStringUTFChars(property, c_property);//extra1.6調用對應的method_onPropertyChanged函數，該method對應的onPropertyChanged函數 env->CallVoidMethod(nat->me,method_onPropertyChanged,str_array);} elseLOG_AND_FREE_DBUS_ERROR_WITH_MSG(&err, msg);goto success;……extra1.6真正的處理函數onPropertyChanged分析/*** Called by native code on aPropertyChanged signal from* org.bluez.Adapter. This method is alsocalled from* {@link BluetoothAdapterStateMachine} toset the "Pairable"* property when Bluetooth is enabled.** @param propValues a string arraycontaining the key and one or more* values.*//*package*/ void onPropertyChanged(String[]propValues) {BluetoothAdapterPropertiesadapterProperties =mBluetoothService.getAdapterProperties();//先fill up cacheif (adapterProperties.isEmpty()) {// We have got a property changebefore// we filled up our cache. adapterProperties.getAllProperties();}log("Property Changed: " +propValues[0] + " : " + propValues[1]);String name = propValues[0];……//對UUIDs的處理 } else if(name.equals("Devices") || name.equals("UUIDs")) {String value = null;int len =Integer.valueOf(propValues[1]);if (len > 0) {StringBuilder str = newStringBuilder();for (int i = 2; i <propValues.length; i++) {str.append(propValues[i]);str.append(",");}value = str.toString();}//把name和value值加入到property的map中 adapterProperties.setProperty(name,value);//extra1.7有UUIDs的change signal會刷新Bluetooth的Stateif (name.equals("UUIDs")){mBluetoothService.updateBluetoothState(value);}//對Pairable和Discoverable的處理 } else if(name.equals("Pairable") || name.equals("Discoverable")) {adapterProperties.setProperty(name,propValues[1]);if(name.equals("Discoverable")) {//5.6發送SCAN_MODE_CHANGED的msg，去改變狀態機 mBluetoothState.sendMessage(BluetoothAdapterStateMachine.SCAN_MODE_CHANGED); }//設置對應的property String pairable =name.equals("Pairable") ? propValues[1] :adapterProperties.getProperty("Pairable");String discoverable =name.equals("Discoverable") ? propValues[1] :adapterProperties.getProperty("Discoverable");// This shouldn't happen, unlessAdapter Properties are null.if (pairable == null ||discoverable == null)return;int mode =BluetoothService.bluezStringToScanMode(pairable.equals("true"),discoverable.equals("true"));if (mode >= 0) {//當pairable和discoverable均為true的時候，會發送一個ACTION_SCAN_MODE_CHANGED的廣播消息 Intent intent = newIntent(BluetoothAdapter.ACTION_SCAN_MODE_CHANGED);intent.putExtra(BluetoothAdapter.EXTRA_SCAN_MODE, mode);intent.addFlags(Intent.FLAG_RECEIVER_REGISTERED_ONLY_BEFORE_BOOT);mContext.sendBroadcast(intent,BLUETOOTH_PERM);}}……extra1.7 UUIDs改變帶來的State的刷新/*** This function is called from BluetoothEvent Loop when onPropertyChanged* for adapter comes in with UUID property.* @param uuidsThe uuids of adapter asreported by Bluez.*//*package*/ synchronized voidupdateBluetoothState(String uuids) {ParcelUuid[] adapterUuids =convertStringToParcelUuid(uuids);//為什么必須包含所有已經有的uuid？？感覺有點反了，再看看if (mAdapterUuids != null &&BluetoothUuid.containsAllUuids(adapterUuids, mAdapterUuids)) {//放SERVICE_RECORD_LOADED的信息，此時，處于warm up狀態，看extra1.8分析狀態如何繼續改變 mBluetoothState.sendMessage(BluetoothAdapterStateMachine.SERVICE_RECORD_LOADED); }}extra1.8 UUIDs對狀態機改變/*** Turning on Bluetooth module's power,loading firmware, starting* event loop thread to listen on Bluetoothmodule event changes.*/private class WarmUp extends State {@Overridepublic void enter() {if (DBG) log("Enter WarmUp:" + getCurrentMessage().what);}@Overridepublic boolean processMessage(Messagemessage) {log("WarmUp process message:" + message.what);boolean retValue = HANDLED;switch(message.what) {case SERVICE_RECORD_LOADED://可以看到，首先會把當時從poweroff過來的一個超時message拿remove了。 removeMessages(PREPARE_BLUETOOTH_TIMEOUT);//轉到hotoff狀態，在hotoff狀態仍會接收到多個SERVICE_RECORD_LOADED的msg，但是那個狀態下該msg將沒有任何handled，因此會一直處于hotoff狀態 transitionTo(mHotOff);break;……5.2mAdapter.enable中mBluetoothState.sendMessage后的狀態機處理由extra的分析可知，此時，Bluetooth的State已經處于HotOff狀態了，所以，從這里開始處理State的變換。/*** Bluetooth Module has powered, firmwareloaded, event loop started,* SDP loaded, but the modules staysnon-discoverable and* non-connectable.*/private class HotOff extends State {@Overridepublic void enter() {if (DBG) log("Enter HotOff:" + getCurrentMessage().what);}@Overridepublic boolean processMessage(Messagemessage) {log("HotOff process message:" + message.what);boolean retValue = HANDLED;switch(message.what) {case USER_TURN_ON://發出BluetoothAdapter.STATE_TURNING_ON的廣播消息 broadcastState(BluetoothAdapter.STATE_TURNING_ON);if ((Boolean) message.obj){//就是把Settings.Secure.BLUETOOTH_ON設為1。用于標志Bluetooth enable了 persistSwitchSetting(true);}// let it fall toTURN_ON_CONTINUE://$FALL-THROUGH$//注意上面沒有break哦case TURN_ON_CONTINUE://這里就是把Bluetooth設為connectable就是Powered=1，這里就把prepareBluetooth中設置的不可連接重新設置回來了。這個重連會產生一些新的變化，它會發送WRITE_SCAN_ENABLE的cmd，因此在該cmd_complete時會有一些新的處理：5.3，它會再次引起狀態機的改變：5.6 mBluetoothService.switchConnectable(true);//進入到Switching狀態 transitionTo(mSwitching);break;……5.3 WRITE_SCAN_ENABLE在cmd_complete后的處理在bluez中是用cmd_complete函數來監視發出cmd完成后的處理的。該函數具體如下：staticinline void cmd_complete(int index, void *ptr){structdev_info *dev = &devs[index];evt_cmd_complete*evt = ptr;uint16_topcode = btohs(evt->opcode);uint8_tstatus = *((uint8_t *) ptr + EVT_CMD_COMPLETE_SIZE);switch(opcode) {……//WRITE_SCAN_ENABLE命令完成的處理函數，會再發一個READ_SCAN_ENABLE的命令 casecmd_opcode_pack(OGF_HOST_CTL, OCF_WRITE_SCAN_ENABLE):hci_send_cmd(dev->sk,OGF_HOST_CTL, OCF_READ_SCAN_ENABLE,0,NULL);break;//5.4緊接著就是對READ_SCAN_ENABLE命令完成的處理，它是通過read_scan_complete來實現的 casecmd_opcode_pack(OGF_HOST_CTL, OCF_READ_SCAN_ENABLE):ptr+= sizeof(evt_cmd_complete);read_scan_complete(index,status, ptr);break;……}5.4 read_scan命令完成的處理staticvoid read_scan_complete(int index, uint8_t status, void *ptr){structbtd_adapter *adapter;read_scan_enable_rp*rp = ptr;DBG("hci%dstatus %u", index, status);//由index得到對應的adapter adapter= manager_find_adapter_by_id(index);if(!adapter) {error("Unableto find matching adapter");return;}//5.5這里算是一個通知adapter，mode改變了。 adapter_mode_changed(adapter,rp->enable);}5.5通知adapter，mode發生了改變voidadapter_mode_changed(struct btd_adapter *adapter, uint8_t scan_mode){constgchar *path = adapter_get_path(adapter);gbooleandiscoverable, pairable;DBG("old0x%02x new 0x%02x", adapter->scan_mode, scan_mode);//若相同，則nothing todoif(adapter->scan_mode == scan_mode){#ifdefBOARD_HAVE_BLUETOOTH_BCM/*we may reset scan_mode already inbtd_adapter_stop(), so comes to here*/set_mode_complete(adapter);#endifreturn;}//把discoverable的timeout清空 adapter_remove_discov_timeout(adapter);//這里開始，是設為SCAN_PAGE| SCAN_INQUIRYswitch(scan_mode) {caseSCAN_DISABLED:adapter->mode= MODE_OFF;discoverable= FALSE;pairable= FALSE;break;caseSCAN_PAGE:adapter->mode= MODE_CONNECTABLE;discoverable= FALSE;pairable= adapter->pairable;break;case(SCAN_PAGE | SCAN_INQUIRY)://設一下模式，在有reply要求的情況下，該步驟還是很重要的 adapter->mode= MODE_DISCOVERABLE;discoverable= TRUE;pairable= adapter->pairable;//還要設一個discoverable的時間if(adapter->discov_timeout != 0)adapter_set_discov_timeout(adapter,adapter->discov_timeout);break;caseSCAN_INQUIRY:/*Address the scenario where a low-level application like* hciconfig changed the scan mode */if(adapter->discov_timeout != 0)adapter_set_discov_timeout(adapter,adapter->discov_timeout);/*ignore, this event should not be sent */default:/*ignore, reserved */return;}/*If page scanning gets toggled emit the Pairable property *///這里會發一個property_changed的pairable的signalif((adapter->scan_mode & SCAN_PAGE) != (scan_mode & SCAN_PAGE))emit_property_changed(connection,adapter->path,ADAPTER_INTERFACE,"Pairable",DBUS_TYPE_BOOLEAN,&pairable);if(!discoverable)adapter_set_limited_discoverable(adapter,FALSE);//這里會發一個property_changed的discoverable的signal emit_property_changed(connection,path,ADAPTER_INTERFACE,"Discoverable",DBUS_TYPE_BOOLEAN,&discoverable);adapter->scan_mode= scan_mode;set_mode_complete(adapter);}5.6 WRTIE_SCAN_ENABLE最終引起的狀態機的變化在此之前，狀態機處于switching的狀態，收到了SCAN_MODE_CHANGED的msg。private class Switching extends State {@Overridepublic void enter() {if (DBG) log("Enter Switching:" + getCurrentMessage().what);}@Overridepublic boolean processMessage(Messagemessage) {log("Switching processmessage: " + message.what);boolean retValue = HANDLED;switch(message.what) {case SCAN_MODE_CHANGED:// This event matchesmBluetoothService.switchConnectable action//mPublicState在hotoff到swtiching狀態變化時已經被設為STATE_TURNING_ON了，所以這里if沒有問題if (mPublicState ==BluetoothAdapter.STATE_TURNING_ON) {// set pairable if it'snot//設置為pairable假如還沒有設置的話，這個會先在bluez中檢查一下當前是否pairable，我們在前面已經設置好了，所以，這里只是一個檢查而已，沒有什么實際性的工作 mBluetoothService.setPairable();//初始化bond state和profile state，這個會在adapter pairable之后，bluetooth turn on之前發生 mBluetoothService.initBluetoothAfterTurningOn();//這邊正式進入到bluetoothon的狀態，終于進了這里，哎。。。 transitionTo(mBluetoothOn);//發送STATE_ON的broadcast broadcastState(BluetoothAdapter.STATE_ON);// run bluetooth nowthat it's turned on// Note runBluetoothshould be called only in adapter STATE_ON//連接那些可以自動連接的設備，通知battery，藍牙打開了 mBluetoothService.runBluetooth();}break;……

?

本文轉自農夫山泉別墅博客園博客，原文鏈接：http://www.cnblogs.com/yaowen/p/4980587.html，如需轉載請自行聯系原作者

總結

以上是生活随笔為你收集整理的Android4.0蓝牙使能的详细解析的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。