Subline Text中，點擊Preferences，選擇Settings - Default

全部屬性解析

// While you can edit this file, it's best to put your changes in // "User/Preferences.sublime-settings", which overrides the settings in here. // // Settings may also be placed in file type specific options files, for // example, in Packages/Python/Python.sublime-settings for python files. {// Sets the colors used within the text area// 主題文件的路徑"color_scheme": "Packages/Color Scheme - Default/Monokai.tmTheme",// Note that the font_face and font_size are overriden in the platform// specific settings file, for example, "Preferences (Linux).sublime-settings".// Because of this, setting them here will have no effect: you must set them// in your User File Preferences.// 設置字體和大小，必須在Settings-User里重寫，這里設置沒有任何效果"font_face": "Consolas","font_size": 16,// Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",// "subpixel_antialias", "no_round" (OS X only) and "directwrite" (Windows only)// 字體選項：no_bold不顯示粗體字，no_italic不顯示斜體字，no_antialias和no_antialias關閉反鋸齒// subpixel_antialias和no_round是OS X系統獨有的"font_options": [],// Characters that are considered to separate words// 在文字上雙擊會全選當前的內容，如果里面出現以下字符，就會被截斷"word_separators": "./\\()\"'-:,.;<>~!@#$%^&*|+=[]{}`~?",// Set to false to prevent line numbers being drawn in the gutter// 是否顯示行號 "line_numbers": true,// Set to false to hide the gutter altogether// 是否顯示行號邊欄 "gutter": true,// Spacing between the gutter and the text// 行號邊欄和文字的間距"margin": 4,// Fold buttons are the triangles shown in the gutter to fold regions of text// 是否顯示代碼折疊按鈕 "fold_buttons": true,// Hides the fold buttons unless the mouse is over the gutter// 不管鼠標在不在行號邊欄，代碼折疊按鈕一直顯示 "fade_fold_buttons": true,// Columns in which to display vertical rulers//列顯示垂直標尺，在中括號里填入數字，寬度按字符計算 "rulers": [],// Set to true to turn spell checking on by default// 是否打開拼寫檢查 "spell_check": false,// The number of spaces a tab is considered equal to// Tab鍵制表符寬度"tab_size": 4,// Set to true to insert spaces when tab is pressed// 設為true時，縮進和遇到Tab鍵時使用空格替代"translate_tabs_to_spaces": false,// If translate_tabs_to_spaces is true, use_tab_stops will make tab and// backspace insert/delete up to the next tabstop// translate_tabs_to_spaces設置為true，Tab和Backspace的刪除/插入作用于制表符寬度// 否則作用于單個空格 "use_tab_stops": true,// Set to false to disable detection of tabs vs. spaces on load// false時禁止在載入的時候檢測制表符和空格 "detect_indentation": true,// Calculates indentation automatically when pressing enter// 按回車時，自動與制表位對齊 "auto_indent": true,// Makes auto indent a little smarter, e.g., by indenting the next line// after an if statement in C. Requires auto_indent to be enabled.//針對C語言的 "smart_indent": true,// Adds whitespace up to the first open bracket when indenting. Requires// auto_indent to be enabled.// 需要啟用auto_indent，第一次打開括號縮進時插入空格？（沒測試出來效果…）"indent_to_bracket": false,// Trims white space added by auto_indent when moving the caret off the// line.// 顯示對齊的白線是否根據回車、tab等操作自動填補 "trim_automatic_white_space": true,// Disables horizontal scrolling if enabled.// May be set to true, false, or "auto", where it will be disabled for// source code, and otherwise enabled.// 是否自動換行，如果選auto，需要加雙引號 "word_wrap": "auto",// Set to a value other than 0 to force wrapping at that column rather than the// window width// 設置窗口內文字區域的寬度"wrap_width": 0,// Set to false to prevent word wrapped lines from being indented to the same// level// 防止被縮進到同一級的字換行 "indent_subsequent_lines": true,// Draws text centered in the window rather than left aligned// 如果沒有定義過，則文件居中顯示（比如新建的文件） "draw_centered": false,// Controls auto pairing of quotes, brackets etc// 自動匹配引號，括號等 "auto_match_enabled": true,// Word list to use for spell checking// 拼寫檢查的單詞列表路徑"dictionary": "Packages/Language - English/en_US.dic",// Set to true to draw a border around the visible rectangle on the minimap.// The color of the border will be determined by the "minimapBorder" key in// the color scheme// 代碼地圖的可視區域部分是否加上邊框，邊框的顏色可在配色方案上加入minimapBorder鍵 "draw_minimap_border": false,// If enabled, will highlight any line with a caret// 突出顯示當前光標所在的行 "highlight_line": false,// Valid values are "smooth", "phase", "blink", "wide" and "solid".// 設置光標閃動方式 "caret_style": "smooth",// Set to false to disable underlining the brackets surrounding the caret// 是否特殊顯示當前光標所在的括號、代碼頭尾閉合標記 "match_brackets": true,// Set to false if you'd rather only highlight the brackets when the caret is// next to one// 設為false時，只有光標在括號或頭尾閉合標記的兩端時，match_brackets才生效 "match_brackets_content": true,// Set to false to not highlight square brackets. This only takes effect if// match_brackets is true// 是否突出顯示圓括號，match_brackets為true生效 "match_brackets_square": true,// Set to false to not highlight curly brackets. This only takes effect if// match_brackets is true// 是否突出顯示大括號，match_brackets為true生效 "match_brackets_braces": true,// Set to false to not highlight angle brackets. This only takes effect if// match_brackets is true// 是否突出顯示尖括號，match_brackets為true生效 "match_brackets_angle": false,// Enable visualization of the matching tag in HTML and XML// html和xml下突出顯示光標所在標簽的兩端，影響HTML、XML、CSS等 "match_tags": true,// Highlights other occurrences of the currently selected text// 全文突出顯示和當前選中字符相同的字符 "match_selection": true,// Additional spacing at the top of each line, in pixels// 設置每一行到頂部，以像素為單位的間距，效果相當于行距"line_padding_top": 0,// Additional spacing at the bottom of each line, in pixels// 設置每一行到底部，以像素為單位的間距，效果相當于行距"line_padding_bottom": 0,// Set to false to disable scrolling past the end of the buffer.// On OS X, this value is overridden in the platform specific settings, so// you'll need to place this line in your user settings to override it.// 設置為false時，滾動到文本的最下方時，沒有緩沖區"scroll_past_end": true,// This controls what happens when pressing up or down when on the first// or last line.// On OS X, this value is overridden in the platform specific settings, so// you'll need to place this line in your user settings to override it.// 控制向上或向下到第一行或最后一行時發生什么（沒明白也沒試出來）"move_to_limit_on_up_down": false,// Set to "none" to turn off drawing white space, "selection" to draw only the// white space within the selection, and "all" to draw all white space// 按space或tab時，實際會產生白色的點（一個空格一個點）或白色的橫線（tab_size設置的制表符的寬度），選中狀態下才能看到// 設置為none時，什么情況下都不顯示這些點和線// 設置為selection時，只顯示選中狀態下的點和線// 設置為all時，則一直顯示 "draw_white_space": "selection",// Set to false to turn off the indentation guides.// The color and width of the indent guides may be customized by editing// the corresponding .tmTheme file, and specifying the colors "guide",// "activeGuide" and "stackGuide"// 制表位的對齊白線是否顯示，顏色可在主題文件里設置（guide，activeGuide，stackGuide） "draw_indent_guides": true,// Controls how the indent guides are drawn, valid options are// "draw_normal" and "draw_active". draw_active will draw the indent// guides containing the caret in a different color.// 制表位的對齊白線，draw_normal為一直顯示，draw_active為只顯示當前光標所在的代碼控制域 "indent_guide_options": ["draw_normal"],// Set to true to removing trailing white space on save// 為true時，保存文件時會刪除每行結束后多余的空格 "trim_trailing_white_space_on_save": false,// Set to true to ensure the last line of the file ends in a newline// character when saving// 為true時，保存文件時光標會在文件的最后向下換一行 "ensure_newline_at_eof_on_save": false,// Set to true to automatically save files when switching to a different file// or application// 切換到其它文件標簽或點擊其它非本軟件區域，文件自動保存 "save_on_focus_lost": false,// The encoding to use when the encoding can't be determined automatically.// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.// 編碼時不能自動檢測編碼時，將自動檢測ASCII, UTF-8 和 UTF-16"fallback_encoding": "Western (Windows 1252)",// Encoding used when saving new files, and files opened with an undefined// encoding (e.g., plain ascii files). If a file is opened with a specific// encoding (either detected or given explicitly), this setting will be// ignored, and the file will be saved with the encoding it was opened// with.// 默認編碼格式"default_encoding": "UTF-8",// Files containing null bytes are opened as hexadecimal by default// 包含空字節的文件被打開默認為十六進制 "enable_hexadecimal_encoding": true,// Determines what character(s) are used to terminate each line in new files.// Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and// 'unix' (LF only).// 每一行結束的時候用什么字符做終止符"default_line_ending": "system",// When enabled, pressing tab will insert the best matching completion.// When disabled, tab will only trigger snippets or insert a tab.// Shift+tab can be used to insert an explicit tab when tab_completion is// enabled.// 設置為enabled時，在一個字符串間按Tab將插入一個制表符// 設置為true時，按Tab會根據前后環境進行代碼自動匹配填補 "tab_completion": true,// Enable auto complete to be triggered automatically when typing.// 代碼提示 "auto_complete": true,// The maximum file size where auto complete will be automatically triggered.// 代碼提示的大小限制"auto_complete_size_limit": 4194304,// The delay, in ms, before the auto complete window is shown after typing// 代碼提示延遲顯示"auto_complete_delay": 0,// Controls what scopes auto complete will be triggered in// 代碼提示的控制范圍"auto_complete_selector": "source - comment",// Additional situations to trigger auto complete// 觸發代碼提示的其他情況"auto_complete_triggers": [ {"selector": "text.html", "characters": "<"} ],// By default, auto complete will commit the current completion on enter.// This setting can be used to make it complete on tab instead.// Completing on tab is generally a superior option, as it removes// ambiguity between committing the completion and inserting a newline.// 設為false時，選擇提示的代碼按回車或點擊可以輸出出來，但選擇true時不會輸出而是直接換行 "auto_complete_commit_on_tab": false,// Controls if auto complete is shown when snippet fields are active.// Only relevant if auto_complete_commit_on_tab is true.// auto_complete_commit_on_tab必須為true，控制代碼提示的活躍度（沒明白…）"auto_complete_with_fields": false,// By default, shift+tab will only unindent if the selection spans// multiple lines. When pressing shift+tab at other times, it'll insert a// tab character - this allows tabs to be inserted when tab_completion is// enabled. Set this to true to make shift+tab always unindent, instead of// inserting tabs.// 設置為false，使用Shift + tab總是插入制表符 "shift_tab_unindent": false,// If true, the copy and cut commands will operate on the current line// when the selection is empty, rather than doing nothing.// 選中的文本按Ctrl + f時，自動復制到查找面板的文本框里"copy_with_empty_selection": true,// If true, the selected text will be copied into the find panel when it's// shown.// On OS X, this value is overridden in the platform specific settings, so// you'll need to place this line in your user settings to override it.// 選中的文本按Ctrl + f時，自動復制到查找面板的文本框里 "find_selected_text": true,// When drag_text is enabled, clicking on selected text will begin a// drag-drop operation//拖動文本 "drag_text": true,// // User Interface Settings// // The theme controls the look of Sublime Text's UI (buttons, tabs, scroll bars, etc)// Data\Packages\Theme – Default\Default.sublime-theme控制軟件的主題"theme": "Default.sublime-theme",// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to// scroll slower, or set to larger than 1 to scroll faster// 滾動的速度"scroll_speed": 1.0,// Controls side bar animation when expanding or collapsing folders// 左邊邊欄文件夾動畫 "tree_animation_enabled": true,// Makes tabs with modified files more visible// 高亮未保存文件 "highlight_modified_tabs": false,// 標簽頁的關閉按鈕 "show_tab_close_buttons": true,// Show folders in the side bar in bold// 在側邊欄顯示文件夾 "bold_folder_labels": false,// OS X 10.7 only: Set to true to disable Lion style full screen support.// Sublime Text must be restarted for this to take effect.// 針對OS X "use_simple_full_screen": false,// OS X only. Valid values are true, false, and "auto". Auto will enable// the setting when running on a screen 2880 pixels or wider (i.e., a// Retina display). When this setting is enabled, OpenGL is used to// accelerate drawing. Sublime Text must be restarted for changes to take// effect.// 針對OS X,使用OpenGL畫圖，需重啟 "gpu_window_buffer": "auto",// Valid values are "system", "enabled" and "disabled"// 延遲滾動條 "overlay_scroll_bars": "system",// // Application Behavior Settings// // Exiting the application with hot_exit enabled will cause it to close// immediately without prompting. Unsaved modifications and open files will// be preserved and restored when next starting.// // Closing a window with an associated project will also close the window// without prompting, preserving unsaved changes in the workspace file// alongside the project.// 熱退出功能！如果設置成true，退出時不會提示是否保存文件，而是直接退出，// 此時無論"remember_open_files"設置成true或者false打開軟件后未保存的文件依然// 存在，如果設置成false，退出時會提示是否保存文件，此時打開軟件后未保存的文件// 是否存在取決于"remember_open_files"設置成true或者false "hot_exit": true,// remember_open_files makes the application start up with the last set of// open files. Changing this to false will have no effect if hot_exit is// true// 記憶之前打開的文件 "remember_open_files": true,// OS X only: When files are opened from finder, or by dragging onto the// dock icon, this controls if a new window is created or not.// 始終在新窗口打開文件，針對OS X"open_files_in_new_window": false,// OS X only: This controls if an empty window is created at startup or not.// 在打開程序的時候新建窗口，針對OS X "create_window_at_startup": true,// Set to true to close windows as soon as the last file is closed, unless// there's a folder open within the window. This is always enabled on OS X,// changing it here won't modify the behavior.//當沒有文件時，關閉程序，針對Windows "close_windows_when_empty": false,// Show the full path to files in the title bar.// On OS X, this value is overridden in the platform specific settings, so// you'll need to place this line in your user settings to override it.// 在標題欄顯示絕對路徑 "show_full_path": true,// Shows the Build Results panel when building. If set to false, the Build// Results can be shown via the Tools/Build Results menu.// 顯示面板 "show_panel_on_build": true,// Preview file contents when clicking on a file in the side bar. Double// clicking or editing the preview will open the file and assign it a tab.// 在側邊欄預覽文件 "preview_on_click": true,// folder_exclude_patterns and file_exclude_patterns control which files// are listed in folders on the side bar. These can also be set on a per-// project basis.// 哪些文件會被顯示到邊欄上 "folder_exclude_patterns": [".svn", ".git", ".hg", "CVS"],"file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],// These files will still show up in the side bar, but won't be included in// Goto Anything or Find in Files"binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],// List any packages to ignore here. When removing entries from this list,// a restart may be required if the package contains plugins.// 刪除你想要忽略的插件，需要重啟 "ignored_packages": ["Vintage"] }

此文件不可修改，需要修改的話在用戶配置文件中修改，操作如下

Subline Text中，點擊Preferences，選擇Settings - User

修改相應屬性對應的屬性值即可

轉載于:https://www.cnblogs.com/tufujie/p/4935183.html

總結

以上是生活随笔為你收集整理的Subline Text默认设置文件Preferences.sublime-settings—Default详解的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。