中繼器與AP的實現

這里我們假定中繼器完成下面這樣的一個功能：

Wired Network ---> Wireless Network ---> 上級無線路由器

即從外部插入一個網線，通過imx6UL上面的無線網卡將數據轉發到上級的路由器上面， 當然也可以完成下面這樣的傳送：

Wireless Network（AP mode） --> Wireless Network（Client） --> 上級無線路由器

即設立一個AP熱點，相當于一個路由器，然后再將這個AP的數據通過另外一個無線網卡轉發到上一級的路由器或者WLAN上面。

用圖片來表示如下：

要完成這些功能， 我們需要：

• 1. 驅動無線網卡
• 2. 建立AP熱點
• 3. 其中一個wired或者wireless介入到上一級路由器或者WLAN中
• 4. 使用IPTables來對數據包進行轉發

對于1，我們?cè)谇懊嬉呀?jīng)完成，對于Wired Network訪問WLAN我們也已經在前面完成。所以這篇我們將完成2與3， 以及4。

AP熱點的建立

建立AP熱點，我們使用經典的Hostapd工具來完成， 這個在OpenWRT中已經存在， 直接選上，然后build即可。

Hostapd的使用

然后我們可以查看對應的使用幫助

root@(none):/# hostapd --help hostapd: invalid option -- '-' hostapd v2.5 User space daemon for IEEE 802.11 AP management, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator Copyright (c) 2002-2015, Jouni Malinen <j@w1.fi> and contributorsusage: hostapd [-hdBKtv] [-P <PID file>] [-e <entropy file>] \[-g <global ctrl_iface>] [-G <group>] \<configuration file(s)>options:-h show this usage-d show more debug messages (-dd for even more)-B run daemon in the background-e entropy file-g global control interface path-G group for control interfaces-P PID file-K include key data in debug messages-t include timestamps in some debug messages-v show hostapd version
因此可以確定需要一個config文件， 這個configuration file我們?nèi)缦绿顚?#xff1a;

root@(none):/# cat /etc/hostapd_ori.conf interface=wlan1 ssid=TonyOpenWRT channel=9 hw_mode=g ignore_broadcast_ssid=0 auth_algs=1 wpa=3 wpa_passphrase=TonyHo123456 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP即我們創建一個SSID為TonyOpenWRT的熱點， wpa_passphrase為密碼， 后面的為加密方式， 然后還選擇了channel， 這個channel可以通過前面的iw list來查看， 例如其中一個為：

Frequencies:* 2412 MHz [1] (20.0 dBm)* 2417 MHz [2] (20.0 dBm)* 2422 MHz [3] (20.0 dBm)* 2427 MHz [4] (20.0 dBm)* 2432 MHz [5] (20.0 dBm)* 2437 MHz [6] (20.0 dBm)* 2442 MHz [7] (20.0 dBm)* 2447 MHz [8] (20.0 dBm)* 2452 MHz [9] (20.0 dBm)* 2457 MHz [10] (20.0 dBm)* 2462 MHz [11] (20.0 dBm)* 2467 MHz [12] (disabled)* 2472 MHz [13] (disabled)* 2484 MHz [14] (disabled)
后面的【】中的就是channel了。

建立AP

然后我們使用后臺運行的方式啟動hostapd，并且打開debug信息，便于我們查看：

root@(none):/# hostapd -B -d /etc/hostapd_ori.conf random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd_ori.conf rfkill: Cannot open RFKILL control device nl80211: RFKILL status not available nl80211: TDLS supported nl80211: TDLS external setup nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:6 nl80211: Using driver-based off-channel TX nl80211: Use separate P2P group interface (driver advertised support) nl80211: interface wlan1 in phy phy1 nl80211: Set mode ifindex 9 iftype 3 (AP) nl80211: Setup AP(wlan1) - device_ap_sme=0 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0xcfd5d8 nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0xcfd5d8 match= nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0xcfd5d8 match= nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0xcfd5d8 match= nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0xcfd5d8 match= nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0xcfd5d8 match= nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xcfd5d8 match= nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0xcfd5d8 match= [ 495.443813] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready nl80211: Add own interface ifindex 9 nl80211: if_indices[16]: 9 phy: phy1 BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits) nl80211: Regulatory information - country=00 nl80211: 2402-2472 @ 40 MHz 20 mBm nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR) nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR) nl80211: 5170-5250 @ 160 MHz 20 mBm (no IR) nl80211: 5250-5330 @ 160 MHz 20 mBm (DFS) (no IR) nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR) nl80211: Added 802.11b mode based on 802.11g information Completing interface initialization Mode: IEEE 802.11g Channel: 9 Frequency: 2452 MHz DFS 0 channels required radar detection nl80211: Set freq 2452 (ht_enabled=0, vht_enabled=0, bandwidth=20 MHz, cf1=2452 MHz, cf2=0 MHz)* freq=2452* vht_enabled=0* ht_enabled=0 RATE[0] rate=10 flags=0x1 RATE[1] rate=20 flags=0x1 RATE[2] rate=55 flags=0x1 RATE[3] rate=110 flags=0x1 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 hostapd_setup_bss(hapd=0xcfcf50 (wlan1), first=1) wlan1: Flushing old station entries nl80211: flush -> DEL_STATION wlan1 (all) wlan1: Deauthenticate all stations nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3 nl80211: send_mlme -> send_frame nl80211: send_frame - Use bss->freq=2452 nl80211: send_frame -> send_frame_cmd nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2452 wait=0) wpa_driver_nl80211_set_key: ifindex=9 (wlan1) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=9 (wlan1) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=9 (wlan1) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_nl80211_set_key: ifindex=9 (wlan1) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 Using interface wlan1 with hwaddr 94:0c:6d:7c:12:f6 and ssid "TonyOpenWRT" Deriving WPA PSK based on passphrase SSID - hexdump_ascii(len=11):54 6f 6e 79 4f 70 65 6e 57 52 54 TonyOpenWRT PSK (ASCII passphrase) - hexdump_ascii(len=12): [REMOVED] PSK (from passphrase) - hexdump(len=32): [REMOVED] random: Got 15/20 bytes from /dev/random random: Only 15/20 bytes of strong random data available from /dev/random random: Not enough entropy pool available for secure operations WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects GMK - hexdump(len=32): [REMOVED] Key Counter - hexdump(len=32): [REMOVED] WPA: Delay group state machine start until Beacon frames have been configured nl80211: Set beacon (beacon_set=0) nl80211: Beacon head - hexdump(len=62): 80 00 00 00 ff ff ff ff ff ff 94 0c 6d 7c 12 f6 94 0c 6d 7c 12 f6 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 0b 54 6f 6e 79 4f 70 65 6e 57 52 54 01 08 82 84 8b 96 0c 12 1y01 09 nl80211: Beacon tail - hexdump(len=65): 2a 01 04 32 04 30 48 60 6c 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 7f 08 00 nl80211: ifindex=9 nl80211: beacon_int=100 nl80211: dtim_period=2 nl80211: ssid - hexdump_ascii(len=11):54 6f 6e 79 4f 70 65 6e 57 52 54 TonyOpenWRT * beacon_int=100 nl80211: hidden SSID not in use nl80211: privacy=1 nl80211: auth_algs=0x1 nl80211: wpa_version=0x3 nl80211: key_mgmt_suites=0x2 nl80211: pairwise_ciphers=0x18 nl80211: group_cipher=0x8 nl80211: SMPS mode - off nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 00 00 00 00 40 WPA: Start group state machine to set initial keys WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) wpa_driver_nl80211_set_key: ifindex=9 (wlan1) alg=2 addr=0x8dc74 key_idx=1 set_tx=1 seq_len=0 key_len=32 nl80211: KEY_DATA - hexdump(len=32): [REMOVED]broadcast key nl80211: Set wlan1 operstate 0->1 (UP) netlink: Operstate: ifindex=9 linkmode=-1 (no change), operstate=6 (IF_OPER_UP) wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED wlan1: Setup of interface done. ctrl_iface not configured!
其中里面用到了加密時候需要的隨機數，這個是使用內核中的random節點來生成的，所以我們?cè)趦?nèi)核這兩個還需要添加random驅動。

驗證AP

在驗證之前，我們需要給我們的這個網卡自己一個IP地址， 因此直接：

root@(none):/# ifconfig wlan1 192.168.2.1 root@(none):/# ifconfig wlan1 wlan1 Link encap:Ethernet HWaddr 94:0c:6d:7c:12:f6 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0inet6 addr: fe80::960c:6dff:fe7c:12f6/64 Scope:LinkUP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:131 errors:0 dropped:0 overruns:0 frame:0TX packets:106 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000 RX bytes:20162 (19.6 KiB) TX bytes:20954 (20.4 KiB)
然后我們打開手機查看是否可以看到我們的熱點：

然后我們使用手動配置IP方式連接熱點

連接完成后， 我們可以看到已經連接的狀態：

然后在手機上面可以Ping一把確定是否連通：

然后在iMX6UL上面也來ping一把這個手機：

root@(none):/# ping 192.168.2.111 PING 192.168.2.111 (192.168.2.111): 56 data bytes 64 bytes from 192.168.2.111: seq=0 ttl=64 time=90.952 ms 64 bytes from 192.168.2.111: seq=1 ttl=64 time=143.093 ms 64 bytes from 192.168.2.111: seq=2 ttl=64 time=4.508 ms 64 bytes from 192.168.2.111: seq=3 ttl=64 time=46.859 ms 64 bytes from 192.168.2.111: seq=4 ttl=64 time=2.539 ms 64 bytes from 192.168.2.111: seq=5 ttl=64 time=2.697 ms ^C --- 192.168.2.111 ping statistics --- 6 packets transmitted, 6 packets received, 0% packet loss round-trip min/avg/max = 2.539/48.441/143.093 ms
至此，基本的連接就好了， 如果想要自動獲取IP地址，那么我們還需要配置DHCPD。

wpa_supplicant的配置

前面我們使用其中一個網卡，配置好了AP， 接下來我們使用另外一個Wireless作為上一級router的接入設備。 這個可以參考我以前寫的文章: Yocto i.MX6 (TQIMX6) (03) : wifi網卡的相關工具wpa_supplicant與dhcp
但是wpa_supplicant的版本升級后， 和hostapd的使用基本一致起來， 因此以前的使用方法稍微有些不同了。

配置

創建一個配置文件，寫明需要接入的SSID，密碼等信息：

root@(none):/# cat /etc/wpa.conf ctrl_interface=/var/run/wpa_supplicant network={ssid="XXX"proto=WPAkey_mgmt=WPA-PSKpairwise=TKIPgroup=TKIPpsk="PASSWORD" }
其中XXX是路由器的熱點名字， psk填寫Password， 加密方式TKIP需要根據實際情況填寫，不明白可以看我以前的文章，或者直接man。

運行

先創建一個runtime目錄：

root@(none):/# mkdir /var/run/wpa_supplicant
然后直接在后臺運行：

root@(none):/# wpa_supplicant -B -iwlan0 -c /etc/wpa.conf Successfully initialized wpa_supplicant rfkill: Cannot open RFKILL contro[ 172.506937] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' l device [ 172.527112] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29 [ 173.083412] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready root@(none):/# [ 174.937567] wlan0: authenticate with bc:d1:77:a0:4f:3c [ 175.073446] wlan0: send auth to bc:d1:77:a0:4f:3c (try 1/3) [ 175.082318] wlan0: authenticated [ 175.087051] rt2800usb 1-1.2.1:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 175.098735] wlan0: associate with bc:d1:77:a0:4f:3c (try 1/3) [ 175.108018] wlan0: RX AssocResp from bc:d1:77:a0:4f:3c (capab=0x411 status=0 aid=5) [ 175.129960] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 175.136678] wlan0: associated [ 176.069997] IPv6: wlan0: IPv6 duplicate address fe80::7edd:90ff:feb2:73b1 detected!

驗證

使用wpa_cli看查看連接的狀態

root@(none):/# wpa_cli status Selected interface 'wlan0' bssid=bc:d1:77:a0:4f:3c freq=2412 ssid=XXX id=0 mode=station pairwise_cipher=TKIP group_cipher=TKIP key_mgmt=WPA-PSK wpa_state=COMPLETED address=7c:dd:90:b2:73:b1 uuid=1e82e362-f927-544e-aa4d-1a229533944cstatus為COMPLETED那么表示連接上了， 然后我們獲取IP地址， 并嘗試ping國內的某個網站：

root@(none):/# udhcpc -i wlan0 udhcpc (v1.24.1) started Sending discover... Sending select for 192.168.1.112... Lease of 192.168.1.112 obtained, lease time 86400 /etc/udhcpc.d/50default: Adding DNS 192.168.1.1 /etc/udhcpc.d/50default: Adding DNS 0.0.0.0root@(none):/# ping meitu.com PING meitu.com (42.62.69.156): 56 data bytes 64 bytes from 42.62.69.156: seq=0 ttl=42 time=44.499 ms 64 bytes from 42.62.69.156: seq=1 ttl=42 time=44.956 ms 64 bytes from 42.62.69.156: seq=2 ttl=42 time=43.122 ms 64 bytes from 42.62.69.156: seq=3 ttl=42 time=43.387 ms 64 bytes from 42.62.69.156: seq=4 ttl=42 time=46.467 ms 64 bytes from 42.62.69.156: seq=5 ttl=42 time=46.267 ms 64 bytes from 42.62.69.156: seq=6 ttl=42 time=43.843 ms ^C --- meitu.com ping statistics --- 7 packets transmitted, 7 packets received, 0% packet loss round-trip min/avg/max = 43.122/44.648/46.467 ms 至此， 我們就完成了基本的配置工作。

總結

以上是生活随笔為你收集整理的OpenWRT中使用无线网卡做中继器与AP热点的全部?jī)?nèi)容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。