說明：

-該存儲庫包含的SIMULINK模型用于控制連接到公用電網三相VSI的P和Q。使用PI控制器（即外環）調節有功功率以跟蹤指令值，然后，PI調節器的輸出代表由內PI控制器調節的逆變器參考直流軸電流。

同樣的程序也適用于無功功率，但產生逆變器的參考正交電流。

Description:

-This repository contains the SIMULINK model to control P and Q of the 3-phase VSI connected to the utility grid. The active power is regulated to track the command value using the PI controller (i.e., outer loop), and then the output of the PI regulator represents the reference direct axis current of the inverter which is regulated by the inner PI controller.

The same procedure could be applied to the reactive power, but to generate the reference quadrature current of the inverter.

用法：

-直接運行文件。

-模型參數包含在模型屬性中。

Usage:

• Run the file directly.

• The model parameters are involved in the model properties.

需要使用MATLAB 2019a或以上版本。

Requirement:

-This model is compatible with Matlab R2019b and the most recent versions.

Contact:

-For further information, please feel free to contact me:

Name:- Abualkasim Bakeer

Position:- Teaching-Assistant at Faculty of Engineering, Aswan University, Aswan, Egypt

Email:- abualkasim.bakeer@aswu.edu.eg

參考文獻：

Eventually, if you use the simulink model or relevant to your academic work, please cite one of the relevant articles 😃, 1. https://ieeexplore.ieee.org/abstract/document/7470518 2. https://www.mdpi.com/1996-1073/13/21/5641 3. https://www.mdpi.com/1996-1073/13/16/4220

更多精彩文章請關注公眾號：

總結

以上是生活随笔為你收集整理的【源码】三相逆变器的有功和无功功率控制仿真的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。