原文鏈接:Connect to Raspberry Pi

操作步驟：樹莓派關機，拔掉SD卡，并插入到電腦中。找到config.txt，直接在尾部添加以下內容(將屏幕分辨率強制修改成1024x600)，保存退出。

max_usb_current=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0 hdmi_drive=1

原文： The 7DP-CAPLCA supports Raspbian/Ubuntu/Kali/Retropie and WIN 10
IoT. Only single-point touch is supported in most of OS, multiple
touches may be supported in some software, max 5-points.

Raspberry Pi doesn’t support hot-plug and auto-recognized the
resolution, you need to configure the resolution manually, otherwise,
the display cannot work normally.

Downolad the newest Raspbian image from Raspberry Pi website（Full or Desktop version is recommended ）

Insert the TF card to host PC by card reader and format it.

• If you have TF card which is ready to use, you can skip to Step 4.

Write Raspbian (.img file) to TF card by image writer software.

• Note: you need to unzip the zip file to get the .img file.

After writing, open the config.txt file which is located in BOOT directory and modify it.

Remove the line dtoverlay=vc4-fkms-V3D

Add the following lines to the end of config.txt file then save.

max_usb_current=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 1024 600 60 6 0 0 0 hdmi_drive=1

總結

以上是生活随笔為你收集整理的树莓派连接7寸屏幕(7DP-CAPLCD)的配置笔记的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。