谷歌推薦的開源穿透服務器，包含trun和stun服務，主頁：https://code.google.com/p/rfc5766-turn-server/
（個人覺得可以利用這個來進一步搭建VPN，有興趣的可以試試）

由于國內通訊都被監控，所以WebRTC是不能直接P2P的，都需要中繼服務作為轉發的，所以在國內使用WebRTC是需要搭建中繼服務。

安裝：
版本：turnserver-3.2.3.95.tar.gz??系統環境：centos

下載必要庫

yum install -y make auomake gcc cc gcc-c++ wget yum install -y openssl-devel libevent libevent-devel mysql-devel mysql-server wget?https://github.com/downloads/libevent/libevent/libevent-2.0.21-stable.tar.gz tar xvfz libevent-2.0.21-stable.tar.gz cd libevent-2.0.21-stable && ./configure make && make install && cd ..

下載turnserver-3.2.3.95.tar.gz并安裝

wget?http://turnserver.open-sys.org/downloads/v3.2.3.95/turnserver-3.2.3.95.tar.gz tar -xvzf turnserver-3.2.3.95.tar.gz cd turnserver-3.2.3.95 ./configure make && make install

安裝后，配置turnserver.conf和turnuserdb.conf
啟動

turnserver -L <public_ip_address> -c turnserver.conf -o -a -b turnuserdb.conf -f -r <system_domain_name>

可以通過以下指令獲取幫助

turnserver -h

turnserver.conf配置：

# RFC5766-TURN-SERVER configuration file # RFC5766-TURN-SERVER配置文件 # # Boolean values note: where boolean value is supposed to be used, # you can use '0', 'off', 'no', 'false', 'f' as 'false, # and you can use '1', 'on', 'yes', 'true', 't' as 'true' # If the value is missed, then it means 'true'. # # 布爾值注意: 布爾值應該被使用, # 您可以使用'0', 'off', 'no', 'false', 'f' 相當于 'false, # 還有你可以用'1', 'on', 'yes', 'true', 't' 相當于 'true' # 如果沒有值，相當于'true'. # # Listener interface device (optional, Linux only). # NOT RECOMMENDED. # # 偵聽器接口設備(僅可選,Linux)。 # 不推薦。 # #listening-device=eth0 # TURN listener port for UDP and TCP (Default: 3478). # Note: actually, TLS & DTLS sessions can connect to the # "plain" TCP & UDP port(s), too - if allowed by configuration. # # TURN為UDP和TCP的偵聽器端口(默認: 3478)。 # 注:實際上,TLS和DTLS會話可以連接到"清晰的"TCP和UDP端口,——如果允許配置。 # #listening-port=3478 listening-port=3478 # TURN listener port for TLS (Default: 5349). # Note: actually, "plain" TCP & UDP sessions can connect to the TLS & DTLS # port(s), too - if allowed by configuration. The TURN server # "automatically" recognizes the type of traffic. Actually, two listening # endpoints (the "plain" one and the "tls" one) are equivalent in terms of # functionality; but we keep both endpoints to satisfy the RFC 5766 specs. # For secure TCP connections, we currently support SSL version 3 and # TLS version 1.0, 1.1 and 1.2. SSL2 "encapculation mode" is also supported. # For secure UDP connections, we support DTLS version 1. # # TURN為TLS的偵聽器端口(默認: 5349)。 # 注意:事實上,"清晰的"TCP和UDP會話可以連接到TLS和DTLS端口，如果允許配置。 # TURN服務器"自動"識別傳輸類型。實際上,兩個監聽終端點("清晰的"端和"TLS"端)是 # 對等的功能;但我們保持兩個端點來滿足RFC 5766規范。 # 對于安全的TCP連接,我們目前支持SSL的3個版本，是TLS 1.0版本,1.1版本和1.2版本。 # SSL2還支持"encapculation模式"。對于安全的UDP連接,我們支持DTLS版本1。 # #tls-listening-port=5349 tls-listening-port=5349 # Alternative listening port for UDP and TCP listeners; # default (or zero) value means "listening port plus one". # This is needed for RFC 5780 support # (STUN extension specs, NAT behavior discovery). The TURN Server # supports RFC 5780 only if it is started with more than one # listening IP address of the same family (IPv4 or IPv6). # RFC 5780 is supported only by UDP protocol, other protocols # are listening to that endpoint only for "symmetry". # # 選擇UDP和TCP監聽器監聽端口; # 默認(或者0)是表示監聽的端口加1. # 這是必須的，為了RFC 5780的支持(STUN的擴展規范, NAT后端的發現)。 # TURN服務器支持RFC 5780只有啟動與多個監聽同一族的IP地址(IPv4或IPv6). # RFC 5780只有UDP協議,支持其他協議是監聽"對稱"型端口的。 # #alt-listening-port=0 ? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??? # Alternative listening port for TLS and DTLS protocols. # Default (or zero) value means "TLS listening port plus one". # # 選擇監聽端口TLS和DTLS協議。 # 默認(或者0)是表示TLS監聽的端口加1. # #alt-tls-listening-port=0 ? ?? # Listener IP address of relay server. Multiple listeners can be specified. # If no IP(s) specified in the config file or in the command line options, # then all IPv4 and IPv6 system IPs will be used for listening. # # 偵聽器中繼服務器的IP地址。可以指定多個偵聽器。 # 如果沒有在配置文件或者命令選項中指定監聽的IP， # 那么所有的IPv4和IPv6所有的IP將被監聽 # #listening-ip=172.17.19.101 #listening-ip=10.207.21.238 #listening-ip=2607:f0d0:1002:51::4 listening-ip=<IP> # Auxiliary STUN/TURN server listening endpoint. # Aux servers have almost full TURN and STUN functionality. # The (minor) limitations are: # 1) Auxiliary servers do not have alternative ports and # they do not support STUN RFC 5780 functionality (CHANGE REQUEST). # 2) Auxiliary servers also are never returning ALTERNATIVE-SERVER reply. # Valid formats are 1.2.3.4:5555 for IPv4 and [1:2::3:4]:5555 for IPv6. # There may be multiple aux-server options, each will be used for listening # to client requests. # # 輔助STUN/TURN服務器監聽端口。 # 輔助服務器幾乎有齊TURN和STUN功能 # (一些)局限性: # 1) 輔助服務器沒有替代的端口并且他們不支持STUN RFC 5780功能(變更請求)。 # 2) 輔助服務器也不會返回ALTERNATIVE-SERVER回復。 # 有效格式，IPv4的1.2.3.4:5555 和IPv6的[1:2::3:4]:5555。 # 可能會有多個aux-server選項,每個將用于監聽客戶端請求。 # #aux-server=172.17.19.110:33478 #aux-server=[2607:f0d0:1002:51::4]:33478 # (recommended for older Linuxes only) # Automatically balance UDP traffic over auxiliary servers (if configured). # The load balancing is using the ALTERNATE-SERVER mechanism. # The TURN client must support 300 ALTERNATE-SERVER response for this # functionality. # # (僅推薦老的Linuxes) # 在輔助服務器自動均衡UDP流量(如果配置)。 # 使用ALTERNATE-SERVER的負載均衡機制。 # TURN客戶端必須支持300個ALTERNATE-SERVER響應。 # #udp-self-balance # Relay interface device for relay sockets (optional, Linux only). # NOT RECOMMENDED. # # 終極接口設備為中繼套接字(可選, 僅Linux). # 不推薦。 # #relay-device=eth1 # Relay address (the local IP address that will be used to relay the # packets to the peer). # Multiple relay addresses may be used. # The same IP(s) can be used as both listening IP(s) and relay IP(s). # If no relay IP(s) specified, then the turnserver will apply the default # policy: it will decide itself which relay addresses to be used, and it # will always be using the client socket IP address as the relay IP address # of the TURN session (if the requested relay address family is the same # as the family of the client socket). # # 中繼地址(本地IP地址將用于傳遞數據包的給每個端) # 可以使用多個中繼地址。 # 相同的IP可以用作監聽IP和繼電器IP。 # 如果沒有指定中繼IP，那么turnserver將應用默認策略：它將自行決定使用那個中繼 # 地址，并且它總是會使用客戶端套接字的IP地址作為中繼的IP地址在TURN會話中(如果 # 請求的中繼地址族解決同族的客戶端套接字)。 # #relay-ip=172.17.19.105 #relay-ip=2607:f0d0:1002:51::5 relay-ip=<IP> # For Amazon EC2 users:# # TURN Server public/private address mapping, if the server is behind NAT. # In that situation, if a -X is used in form "-X <ip>" then that ip will be reported # as relay IP address of all allocations. This scenario works only in a simple case # when one single relay address is be used, and no RFC5780 functionality is required. # That single relay address must be mapped by NAT to the 'external' IP. # The "external-ip" value, if not empty, is returned in XOR-RELAYED-ADDRESS field. # For that 'external' IP, NAT must forward ports directly (relayed port 12345 # must be always mapped to the same 'external' port 12345). # In more complex case when more than one IP address is involved, # that option must be used several times, each entry must # have form "-X <public-ip/private-ip>", to map all involved addresses. # RFC5780 NAT discovery STUN functionality will work correctly, # if the addresses are mapped properly, even when the TURN server itself # is behind A NAT. # By default, this value is empty, and no address mapping is used. # # Amazon EC2用戶: # TURN服務器公開/私有的地址映射，假如服務器是在NAT后端。 # 在這種情況下,如果一個表單中"-X <ip>"使用一個-X，然后該ip將被作為中繼ip地址來使用。 # 這種情況只適用于一個簡單的例子,當一個中繼的地址是被使用,和沒有RFC5780功能是必需的。 # 單個中繼地址必須通過NAT映射到外部的IP。 # 外部的IP值，假如不為空，通過XOR-RELAYED-ADDRESS字段返回。 # 外部的IP,NAT必須直接轉發端口(轉發端口12345，必須總是映射到相同的外部端口12345)。 # 在更復雜的情況下,當涉及到多個IP地址,這個選項必須使用幾次,每個條目必須形 # 成"-X <public-ip/private-ip>",將所有涉及到的地址。 # RFC5780 NAT發現STUN功能正常工作，如果正確的地址映射,即使TURN服務器本身是 # 在一個NAT后。 # 默認，該值為空，并且沒有使用地址映射。 # #external-ip=60.70.80.91 # #OR: # #external-ip=60.70.80.91/172.17.19.101 #external-ip=60.70.80.92/172.17.19.102 external-ip=<IP> # Number of relay threads to handle the established connections # (in addition to authentication thread and the listener thread). # If set to 0 then application runs relay process in a single thread, # in the same thread with the listener process (the authentication thread will # still be a separate thread). # In the older systems (Linux kernel before 3.9), # the number of UDP threads is always one thread per network listening endpoint - # including the auxiliary endpoints - unless 0 (zero) or 1 (one) value is set. # # 數量的中繼線程處理建立連接(除了驗證線程和偵聽器線程)。 # 如果設置為0,那么應用程序中繼進程在一個線程中運行,在同一 # 個線程中監聽處理(身份驗證線程仍然是一個單獨的線程)。 # 在舊系統(3.9 Linux內核之前),數量的UDP線程總是一個線程監聽一個網絡端點,包括輔助端點——除非設置0或1值。 # #relay-threads=0 relay-threads=10 # Lower and upper bounds of the UDP relay endpoints: # (default values are 49152 and 65535) # # UDP中繼端點的上下邊界: # (默認是49152至65535) # #min-port=49152 #max-port=65535 ? ?? # Uncomment to run TURN server in 'normal' 'moderate' verbose mode. # By default the verbose mode is off. # # 取消TURN服務器運行'normal' 'moderate'詳細模式。 # 默認情況下,詳細模式是關閉的。 # #verbose ? ?? # Uncomment to run TURN server in 'extra' verbose mode. # This mode is very annoying and produces lots of output. # Not recommended under any normal circumstances. # # 取消TURN服務器運行'extra'詳細模式。 # 這種模式是非常惱人的,產生大量的輸出。 # 在任何正常情況下不建議。 # #Verbose # Uncomment to use fingerprints in the TURN messages. # By default the fingerprints are off. # # 取消在TURN消息中使用指紋。 # 默認情況下,指紋是關閉的。 # #fingerprint # Uncomment to use long-term credential mechanism. # By default no credentials mechanism is used (any user allowed). # This option can be used with either flat file user database or # PostgreSQL DB or MySQL DB or Redis DB for user keys storage. # # 取消使用長期證書機制。 # 默認情況下不使用憑證機制(允許任何用戶)。 # 這個選項可能使用用戶數據文件或PostgreSQL或MySQL或Redis來存儲用戶密鑰。 # #lt-cred-mech lt-cred-mech # Uncomment to use short-term credential mechanism. # By default no credentials mechanism is used (any user allowed). # For short-term credential mechanism you have to use PostgreSQL or # MySQL or Redis database for user password storage. # # 取消使用短期證書機制。 # 默認情況下不使用憑證機制(允許任何用戶)。 # 短期證書機制必須使用PostgreSQL或MySQL或Redis數據庫來存儲用戶密碼。 # #st-cred-mech # This option is opposite to lt-cred-mech or st-cred-mech. # (TURN Server with no-auth option allows anonymous access). # If neither option is defined, and no users are defined, # then no-auth is default. If at least one user is defined, # in this file or in command line or in usersdb file, then # lt-cred-mech is default. # # 這個選項是lt-cred-mech或st-cred-mech相反。 # (TURN服務器no-auth選項允許匿名訪問)。 # 如果沒有選項定義,沒有用戶定義,那么no-auth默認。 # 如果至少定義有一個用戶,在這個文件中或在命令行或usersdb文件, # 那么lt-cred-mech默認。 # #no-auth # TURN REST API flag. # Flag that sets a special authorization option that is based upon authentication secret. # This feature can be used with the long-term authentication mechanism, only. # This feature purpose is to support "TURN Server REST API", see # "TURN REST API" link in the project's page #?http://code.google.com/p/rfc5766-turn-server/. # This option is used with timestamp: # usercombo -> "timestamp:userid" # turn user -> usercombo # turn password -> base64(hmac(secret key, usercombo)) # This allows TURN credentials to be accounted for a specific user id. # If you don't have a suitable id, the timestamp alone can be used. # This option is just turning on secret-based authentication. # The actual value of the secret is defined either by option static-auth-secret, # or can be found in the turn_secret table in the database (see below). # # TURN REST API標志。 # 標志是設置一個特殊的授權選項,是基于身份驗證的私密。 # 這個功能可以用于長期驗證機制。 # 這個功能的目的是支持"TURN Server REST API",看到"TURN Server REST API"項目的頁面的鏈接 #?http://code.google.com/p/rfc5766-turn-server/。 # 這個選項是使用時間戳: # usercombo -> "timestamp:userid" # turn user -> usercombo # turn password -> base64(hmac(secret key, usercombo)) # 這允許TURN憑證占用一個特定的用戶id。 # 如果你沒有一個合適的id,可以使用單獨的時間戳。 # 這個選項只是打開基于私密的身份驗證。 # 實際值定義的私密就是通過選擇static-auth-secret,或可以在數據庫中找到turn_secret表(見下文)。 # #use-auth-secret # 'Static' authentication secret value (a string) for TURN REST API only. # If not set, then the turn server # will try to use the 'dynamic' value in turn_secret table # in user database (if present). The database-stored??value can be changed on-the-fly # by a separate program, so this is why that other mode is 'dynamic'. # # TURN REST API的'Static'身份驗證的私密值(字符串) # 如果沒有設置，那么turn服務器將嘗試使用'dynamic'值在用戶數據庫的turn_secret表(如果存在)。 # 數據庫存儲的值可以隨時改變，通過單獨的程序，所以這就是'dynamic'模式。 # #static-auth-secret? ??? # 'Static' user accounts for long term credentials mechanism, only. # This option cannot be used with TURN REST API or with short-term credentials # mechanism. # 'Static' user accounts are NOT dynamically checked by the turnserver process, # so that they can NOT be changed while the turnserver is running. # # 'Static'用戶長期占憑證機制。 # 這個選項不能用于TURN REST API或短期憑證機制。 # 'Static'用戶帳戶不是turnserver程序動態檢查,所以他們不能改變在turnserver運行時。 # #user=username1:key1 #user=username2:key2 # OR: #user=username1:password1 #user=username2:password2 # # Keys must be generated by turnadmin utility. The key value depends # on user name, realm, and password: # # 鑰匙必須由turnadmin實用程序生成。鍵值取決于用戶名稱、領域和密碼: # # Example: # 例子,使用以下命令: # # $ turnadmin -k -u ninefingers -r?north.gov?-p youhavetoberealistic # # Output: 0xbc807ee29df3c9ffa736523fb2c4e8ee # 輸出是: 0xbc807ee29df3c9ffa736523fb2c4e8ee # # ('0x' in the beginning of the key is what differentiates the key from # password. If it has 0x then it is a key, otherwise it is a password). # ('0x'開始的關鍵是區分從密碼的關鍵。如果它有0x,那么它是一個關鍵,否則這是一個密碼)。 # # The corresponding user account entry in the config file will be: # 相應的配置文件中的用戶帳戶條目將: # #user=ninefingers:0xbc807ee29df3c9ffa736523fb2c4e8ee # Or, equivalently, with open clear password (less secure): #或者是這樣，明文密碼(不安全的): #user=ninefingers:youhavetoberealistic # user=<yourname:yourpsw> # 'Dynamic' user accounts database file name. # Only users for long-term mechanism can be stored in a flat file, # short-term mechanism will not work with option, the short-term # mechanism required PostgreSQL or MySQL or Redis database. # 'Dynamic' long-term user accounts are dynamically checked by the turnserver process, # so that they can be changed while the turnserver is running. # Default file name is turnuserdb.conf. # # 'Dynamic'用戶帳戶數據庫文件名。 # 只有用戶長期機制可以存儲在一個文件,短期機制不會處理選項,短期機制需要PostgreSQL或MySQL或 # Redis數據庫。 # 'Dynamic'的長期用戶帳戶在turnserver程序中動態檢查的,這樣他們可以改變的在turnserver運行時。 # 默認文件名是turnuserdb.conf. # #userdb=/usr/local/etc/turnuserdb.conf userdb=/etc/turnuserdb.conf # PostgreSQL database connection string in the case that we are using PostgreSQL # as the user database. # This database can be used for long-term and short-term credential mechanisms # and it can store the secret value for secret-based timed authentication in TURN RESP API. # See?http://www.postgresql.org/docs/8.4/static/libpq-connect.html?for 8.x PostgreSQL # versions connection string format, see #?http://www.postgresql.org/docs/9.2/static/libpq-connect.html#LIBPQ-CONNSTRING # for 9.x and newer connection string formats. # # PostgreSQL數據庫連接字符串,使用PostgreSQL作為用戶數據庫。 # 該數據庫可用于長期和短期證書機制,它可以存儲的私密值，為基于私密身份驗證的在TURN RESP API中。 # 8.x PostgreSQL版本請參見http://www.postgresql.org/docs/8.4/static/libpq-connect.html的連接字符串 # 格式,9.x和更新的請參閱http://www.postgresql.org/docs/9.2/static/libpq-connect.html?LIBPQ-CONNSTRING # 的連接字符串格式。 # #psql-userdb="host=<host> dbname=<database-name> user=<database-user> password=<database-user-password> connect_timeout=30" # MySQL database connection string in the case that we are using MySQL # as the user database. # This database can be used for long-term and short-term credential mechanisms # and it can store the secret value for secret-based timed authentication in TURN RESP API. # Use string format as below (space separated parameters, all optional): # # MySQL數據庫連接字符串,使用MySQL作為用戶數據庫。 # 該數據庫可用于長期和短期證書機制,它可以存儲的私密值，為基于私密身份驗證的在TURN RESP API中。 # 使用字符串格式如下(空間分離參數,所有可選): # #mysql-userdb="host=<host> dbname=<database-name> user=<database-user> password=<database-user-password> port=<port> connect_timeout=<seconds>" # Redis database connection string in the case that we are using Redis # as the user database. # This database can be used for long-term and short-term credential mechanisms # and it can store the secret value for secret-based timed authentication in TURN RESP API. # Use string format as below (space separated parameters, all optional): # # Redis數據庫連接字符串,使用Redis作為用戶數據庫。 # 該數據庫可用于長期和短期證書機制,它可以存儲的私密值，為基于私密身份驗證的在TURN RESP API中。 # 使用字符串格式如下(空間分離參數,所有可選): # #redis-userdb="ip=<ip-address> dbname=<database-number> password=<database-user-password> port=<port> connect_timeout=<seconds>" # Redis status and statistics database connection string, if used (default - empty, no Redis stats DB used). # This database keeps allocations status information, and it can be also used for publishing # and delivering traffic and allocation event notifications. # The connection string has the same parameters as redis-userdb connection string. # Use string format as below (space separated parameters, all optional): # # Redis狀態和統計數據庫連接字符串,如果使用(默認空,沒有Redis統計數據庫使用)。 # 這個數據庫保持分配狀態信息,它也可以用于發布和交付傳輸和分配事件通知。 # 連接字符串有相同的參數作為redis-userdb連接字符串。 # 使用字符串格式如下(空間分離參數,所有可選): # #redis-statsdb="ip=<ip-address> dbname=<database-number> password=<database-user-password> port=<port> connect_timeout=<seconds>" # Realm for long-term credentials mechanism and for TURN REST API. # # TURN REST API的長期憑證機制范圍。 # #realm=mycompany.org # Per-user allocation quota. # default value is 0 (no quota, unlimited number of sessions per user). # # 每個用戶分配配額。 # 默認值為0(沒有配額,每個用戶無限數量的會話)。 # #user-quota=0 # Total allocation quota. # default value is 0 (no quota). # # 總分配配額。 # 默認值為0(無配額)。 # #total-quota=0 # Max bytes-per-second bandwidth a TURN session is allowed to handle # (input and output network streams are treated separately). Anything above # that limit will be dropped or temporary suppressed (within # the available buffer limits). # # TURN會話允許最大的傳輸占用帶寬(輸入和輸出網絡流分別處理)。 # 高于限制將被刪除或暫時抑制(在可用的緩沖區范圍內)。 # #max-bps=0 max-bps=1024 # Uncomment if no UDP client listener is desired. # By default UDP client listener is always started. # # 如果沒有UDP客戶端監聽器需要取消。 # 默認情況下UDP客戶端監聽器總是啟動。 # #no-udp # Uncomment if no TCP client listener is desired. # By default TCP client listener is always started. # # 如果沒有TCPP客戶端監聽器需要取消。 # 默認情況下TCPP客戶端監聽器總是啟動。 # #no-tcp # Uncomment if no TLS client listener is desired. # By default TLS client listener is always started. # # 如果沒有TLS客戶端監聽器需要取消。 # 默認情況下TLS客戶端監聽器總是啟動。 # #no-tls # Uncomment if no DTLS client listener is desired. # By default DTLS client listener is always started. # # 如果沒有DTLS客戶端監聽器需要取消。 # 默認情況下DTLS客戶端監聽器總是啟動。 # #no-dtls # Uncomment if no UDP relay endpoints are allowed. # By default UDP relay endpoints are enabled (like in RFC 5766). # # 如果不允許UDP中繼端點需要取消。 # 默認情況下啟用UDP繼電器端點(如在RFC 5766)。 # #no-udp-relay # Uncomment if no TCP relay endpoints are allowed. # By default TCP relay endpoints are enabled (like in RFC 6062). # # 如果不允許TCP中繼端點需要取消。 # 默認情況下啟用TCP繼電器端點(如在RFC 5766)。 # #no-tcp-relay # Uncomment if extra security is desired, # with nonce value having limited lifetime (600 secs). # By default, the nonce value is unique for a session, # but it has unlimited lifetime. With this option, # the nonce lifetime is limited to 600 seconds, after that # the client will get 438 error and will have to re-authenticate itself. # # 取消如果需要額外的安全,現時已有有限的生命周期(600秒)。 # 默認情況下,一個會話的唯一臨界值,但它一般擁有無限的生命周期。這個選項,臨界值 # 僅限于600秒,之后,客戶端將得到438錯誤,將不得不重新認證。 # #stale-nonce # Certificate file. # Use an absolute path or path relative to the # configuration file. # # 證書文件。 # 使用絕對路徑或路徑相對于配置文件。 # #cert=/usr/local/etc/turn_server_cert.pem # Private key file. # Use an absolute path or path relative to the # configuration file. # Use PEM file format. # # 私鑰文件。 # 使用絕對路徑或路徑相對于配置文件。使用PEM文件格式。 # #pkey=/usr/local/etc/turn_server_pkey.pem # Private key file password, if it is in encoded format. # This option has no default value. # # 私有密鑰文件密碼,如果是在編碼格式。 # 這個選項沒有默認值。 # #pkey-pwd=... # Allowed OpenSSL cipher list for TLS/DTLS connections. # Default value is "DEFAULT". # # 允許OpenSSL的密碼列表為TLS/DTLS連接。 # 默認值是"DEFAULT" # #cipher-list="DEFAULT" # CA file in OpenSSL format. # Forces TURN server to verify the client SSL certificates. # By default it is not set: there is no default value and the client # certificate is not checked. # # 在OpenSSL格式的CA文件。 # 強制TURN服務器驗證客戶端SSL證書。 # 默認情況下它沒有設置:沒有默認值,不檢查的客戶端證書。 # # Example: #CA-file=/etc/ssh/id_rsa.cert # Curve name for EC ciphers, if supported by OpenSSL library (TLS and DTLS). # The default value is prime256v1. # # 曲線名稱的EC密碼,如果由OpenSSL庫支持(TLS和DTLS)。 # 默認值是prime256v1。 # #ec-curve-name=prime256v1 # Use 566 bits predefined DH TLS key. Default size of the key is 1066. # # 使用566位預定義DH TLS鍵。默認鍵大小是1066 # #dh566 # Use 2066 bits predefined DH TLS key. Default size of the key is 1066. # # 使用2066位預定義DH TLS鍵。默認鍵大小是1066 # #dh2066 # Use custom DH TLS key, stored in PEM format in the file. # Flags --dh566 and --dh2066 are ignored when the DH key is taken from a file. # # 使用慣例的DH TLS鍵，使用PEM格式存儲在文件里 # 當DH鍵從文件里加載，將忽略標志--dh566和--dh2066 # #dh-file=<DH-PEM-file-name> # Flag to prevent stdout log messages. # By default, all log messages are going to both stdout and to # the configured log file. With this option everything will be # going to the configured log only (unless the log file itself is stdout). # # 標志防止輸出日志信息 # 默認情況下,所有日志消息將輸出到配置的日志文件。采用這一選項都將只配置日志 # (除非日志文件本身是輸出的)。 # #no-stdout-log # Option to set the log file name. # By default, the turnserver tries to open a log file in # /var/log, /var/tmp, /tmp and current directories directories # (which open operation succeeds first that file will be used). # With this option you can set the definite log file name. # The special names are "stdout" and "-" - they will force everything # to the stdout. Also, the "syslog" name will force everything to # the system log (syslog). # In the runtime, the logfile can be reset with the SIGHUP signal # to the turnserver process. # # 設置日志文件 # 默認情況下,turnserver嘗試一個日志文件在/var/log,/var/tmp,/tmp和 # 當前目錄(那個文件先打開成功,文件將被使用)。 # 采用這一選項可以設置明確的日志文件名。 # 特殊的名字是"stdout"和"-"——他們將強制所有的輸出。同時,"syslog"名稱將強制所有的系統日志(syslog)。 # 在運行時,日志文件可以重置通過SIGHUP信號在turnserver程序中。 # #log-file=/var/tmp/turn.log # Option to redirect all log output into system log (syslog). # # 選擇重定向所有日志輸出到系統日志(syslog)。 # #syslog # This flag means that no log file rollover will be used, and the log file # name will be constructed as-is, without PID and date appendage. # # 這個標志意味著沒有日志文件將使用翻轉,并按原樣將創建日志文件名稱,沒有PID和日期的附加。 # #simple-log # Option to set the "redirection" mode. The value of this option # will be the address of the alternate server for UDP & TCP service in form of # <ip>[:<port>]. The server will send this value in the attribute # ALTERNATE-SERVER, with error 300, on ALLOCATE request, to the client. # Client will receive only values with the same address family # as the client network endpoint address family. # See RFC 5389 and RFC 5766 for ALTERNATE-SERVER functionality description. # The client must use the obtained value for subsequent TURN communications. # If more than one --alternate-server options are provided, then the functionality # can be more accurately described as "load-balancing" than a mere "redirection". # If the port number is omitted, then the default port # number 3478 for the UDP/TCP protocols will be used. # Colon (?characters in IPv6 addresses may conflict with the syntax of # the option. To alleviate this conflict, literal IPv6 addresses are enclosed # in square brackets in such resource identifiers, for example: # [2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 . # Multiple alternate servers can be set. They will be used in the # round-robin manner. All servers in the pool are considered of equal weight and # the load will be distributed equally. For example, if we have 4 alternate servers, # then each server will receive 25% of ALLOCATE requests. A alternate TURN server # address can be used more than one time with the alternate-server option, so this # can emulate "weighting" of the servers. # # 選項設置"redirection"模式。這個選項的值將備用服務器的地址UDP和TCP服務形式的<ip>[:<port>]。 # 服務器將發送這個值屬性ALTERNATE-SERVER,錯誤300,在ALLOCATE請求,客戶端。 # 客戶端將只接收和自己相同的地址族的客戶端的值。查看RFC 5389和RFC 5766為ALTERNATE-SERVER的功能描述。 # 客戶端必須使用獲得的值為隨后的TURN通信。如果不止一個——alternate-server選項提供,那么功能可以更準確 # 地描述為"load-balancing",而不僅僅是一個"redirection"。如果端口號省略,那么為UDP/TCP協議，使用默認端 # 口號是3478。冒號(在IPv6地址字符可能與選項的語法沖突。緩解這種沖突,文字IPv6地址包含在方括號在這種 # 資源標識符,例如[2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 。 # 可以設置多個備用服務器。他們將用于循環的方式。所有服務器池中被認為是平等的重量和載荷將平均分配的原則。 # 例如,如果我們有4個備用服務器,每個服務器將獲得25%的分配請求。備用TURN服務器地址可以使用超過一次 # alternate-server選項,所以這可以效仿的"weighting"服務器。 # # Examples: #alternate-server=1.2.3.4:5678 #alternate-server=11.22.33.44:56789 #alternate-server=5.6.7.8 #alternate-server=[2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 ? ?? ?? ?? ??? # Option to set alternative server for TLS & DTLS services in form of # <ip>:<port>. If the port number is omitted, then the default port # number 5349 for the TLS/DTLS protocols will be used. See the previous # option for the functionality description. # # 選項設置替代服務器TLS和DTLS服務形式的<ip>:<port>。 # 如果省略的端口號,那么默認端口號5349將使用TLS/DTLS協議。看到前面選擇的功能描述。 # # Examples: #tls-alternate-server=1.2.3.4:5678 #tls-alternate-server=11.22.33.44:56789 #tls-alternate-server=[2001:db8:85a3:8d3:1319:8a2e:370:7348]:3478 # Option to suppress TURN functionality, only STUN requests will be processed. # Run as STUN server only, all TURN requests will be ignored. # By default, this option is NOT set. # # 選擇抑制TURN功能,只有STUN的請求將被處理。 # 作為STUN服務器,所有TURN請求將被忽略。 # 默認情況下,沒有設置這個選項。 # #stun-only # Option to suppress STUN functionality, only TURN requests will be processed. # Run as TURN server only, all STUN requests will be ignored. # By default, this option is NOT set. # # 選擇抑制STUN功能,只有TURN的請求將被處理。 # 作為TURN服務器,所有STUN請求將被忽略。 # 默認情況下,沒有設置這個選項。 # #no-stun # This is the timestamp/username separator symbol (character) in TURN REST API. # The default value is ':'. # # 這是時間戳/用戶名分離器符號(字符)在TURN REST API。 # 默認是使用':' # # rest-api-separator=:? ?? # Flag that can be used to disallow peers on the loopback addresses (127.x.x.x and ::1). # This is an extra security measure. # # 標記用于不接受的端在環回地址(127.x.x.x 和 ::1)。 # 這是一個額外的安全措施。 # #no-loopback-peers # Flag that can be used to disallow peers on well-known broadcast addresses (224.0.0.0 and above, and FFXX:*). # This is an extra security measure. # # 標記用于不接受的端在廣播地址(224.0.0.0和以上的，和FFXX:*)。 # 這是一個額外的安全措施。 # #no-multicast-peers # Option to set the max time, in seconds, allowed for full allocation establishment. # Default is 60 seconds. # # 選項設置的最大時間,以秒為單位,允許完整的分配。 # 默認60秒 # #max-allocate-timeout=60 # Option to allow or ban specific ip addresses or ranges of ip addresses. # If an ip address is specified as both allowed and denied, then the ip address is # considered to be allowed. This is useful when you wish to ban a range of ip # addresses, except for a few specific ips within that range. # This can be used when you do not want users of the turn server to be able to access # machines reachable by the turn server, but would otherwise be unreachable from the # internet (e.g. when the turn server is sitting behind a NAT) # # 選擇允許或禁止特定的ip地址或ip地址范圍。 # 如果指定一個ip地址允許和拒絕,那么ip地址被認為是允許的。這是有用的,當你希望禁止一個范 # 圍的ip地址,除了一些特定的ip范圍內。 # 這可以使用當你不希望turn服務器的用戶能夠訪問機器通過turn服務器,但可能是另一方面從互聯 # 網上不能到達(例如,當turn服務器是在一個NAT后) # # Examples: # denied-peer-ip=83.166.64.0-83.166.95.255 # allowed-peer-ip=83.166.68.45 # File name to store the pid of the process. # Default is /var/run/turnserver.pid (if superuser account is used) or # /var/tmp/turnserver.pid . # # 存儲進程pid的文件名。 # 默認是/var/run/turnserver.pid(超級用戶使用)或者是/var/tmp/turnserver.pid # #pidfile="/var/run/turnserver.pid" pidfile="/var/tmp/turnserver.pid" # Require authentication of the STUN Binding request. # By default, the clients are allowed anonymous access to the STUN Binding functionality. # # 需要STUN綁定請求的身份驗證。 # 默認情況下,客戶允許匿名訪問STUN綁定功能。 # #secure-stun # Require SHA256 digest function to be used for the message integrity. # By default, the server uses SHA1 (as per TURN standard specs). # With this option, the server # always requires the stronger SHA256 function. The client application # must support SHA256 hash function if this option is used. If the server obtains # a message from the client with a weaker (SHA1) hash function then the # server returns error code 426. # # 需要SHA256采摘功能用于消息的完整性。 # 默認情況下,服務器使用SHA1(按標準規格)。 # 采用這一選項,服務器總是需要更強的SHA256功能。客戶端應用程序必須支持SHA256散列函數 # 如果使用這個選項。如果服務器獲得消息從客戶端較弱(SHA1)散列函數那么服務器返回錯誤代碼426。 # #sha256 # Mobility with ICE (MICE) specs support. # # 移動的ICE(MICE)的規范支持。 # #mobility # User name to run the process. After the initialization, the turnserver process # will make an attempt to change the current user ID to that user. # # 用戶名運行程序。初始化后,turnserver程序?qū)⒃噲D改變當前用戶的用戶ID。 # #proc-user=<user-name> # Group name to run the process. After the initialization, the turnserver process # will make an attempt to change the current group ID to that group. # # 組名運行程序。初始化后,turnserver程序?qū)⒃噲D改變當前組的組ID。 # #proc-group=<group-name> # Turn OFF the CLI support. # By default it is always ON. # See also options cli-ip and cli-port. # # 關掉CLI的支持。 # 默認情況下它總是ON。 # 參閱選項cli-ip和cli-port。 # #no-cli #Local system IP address to be used for CLI server endpoint. Default value # is 127.0.0.1. # # 本地系統的IP地址將用于CLI服務器端點。默認值是127.0.0.1。 # #cli-ip=127.0.0.1 # CLI server port. Default is 5766. # # CLI服務器端口。默認是5766。 # #cli-port=5766 # CLI access password. Default is empty (no password). # # CLI訪問密碼。默認是空的(沒有密碼)。 # #cli-password=logen # Server relay. NON-STANDARD AND DANGEROUS OPTION. # Only for those applications when we want to run # server applications on the relay endpoints. # This option eliminates the IP permissions check on # the packets incoming to the relay endpoints. # # 中繼服務器。NON-STANDARD和DANGEROUS的選擇。 # 只對這些應用程序時,我們想在中繼服務器上運行服務器應用程序端點。 # 這個選項可以消除IP權限檢查傳遞的數據包傳入的端點。 # #server-relay # Maximum number of output sessions in ps CLI command. # This value can be changed on-the-fly in CLI. The default value is 256. # # 最大數量的輸出會議在ps CLI命令。 # 這個值可以動態改變在CLI。默認值是256。 # #cli-max-output-sessions # Set network engine type for the process (for internal purposes). # # 設置網絡引擎類型(用于內部目的)的過程。 # #ne=[1|2|3] # Do not allow an SSL/TLS version of protocol # # 不允許一個SSL/TLS版本的協議 # #no-sslv2 #no-sslv3 #no-tlsv1 #no-tlsv1_1 #no-tlsv1_2

turnuserdb.conf

#This file can be used as user accounts storage for long-term credentials mechanism. #這個文件可以用作長期用戶帳戶存儲憑證機制。 # #username1:key1 #username2:key2 # OR: #username1:password1 #username2:password2 # # Keys must be generated by turnadmin utility. The key value depends # on user name, realm, and password: # 鑰匙必須由turnadmin實用程序生成。鍵值取決于用戶名稱、領域和密碼: # # Example: # 例子,使用以下命令: # $ turnadmin -k -u ninefingers -r?north.gov?-p youhavetoberealistic # Output: 0xbc807ee29df3c9ffa736523fb2c4e8ee # 輸出是: 0xbc807ee29df3c9ffa736523fb2c4e8ee # # ('0x' in the beginning of the key is what differentiates the key from # password. If it has 0x then it is a key, otherwise it is a password). # ('0x'開始的關鍵是區分從密碼的關鍵。如果它有0x,那么它是一個關鍵,否則這是一個密碼)。 # # The corresponding user account entry in the userdb file will be: # 相應的用戶帳號在userdb文件中是： # #ninefingers:0xbc807ee29df3c9ffa736523fb2c4e8ee # Or, equivalently (less secure): #或者是這樣(不安全的): #ninefingers:youhavetoberealistic # yourname:yourpsw

轉自：www.webrtcbbs.com

總結

以上是生活随笔為你收集整理的turnserver.conf文件详解的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。