#!/bin/bash:<> /etc/ld.so.conf ldconfig -v!system_init () { sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config #//永久設置selinux為disabled狀態 setenforce 0 #//手動設置selinux為Permissive# sed -i 's/#Port 22/Port 22022' /etc/ssh/sshd_config #//如果需要更改遠程端口，去掉前面注釋并修改相應的端口 sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config #//允許root用戶遠程登錄，不允許yes改為no sed -i '1a nameserver 114.114.114.114' /etc/resolv.conf #//添加NDS地址 sed -i '1a options timeout:1 attempts:1 rotate' /etc/resolv.conf #//設置超時時間和重試次數，加上這條可以解決dns解析慢的問題 echo root | passwd --stdin root yum -y install wget net-tools httpd-tools sysstat lsof tree if [ $? = 0 ];then systemctl stop firewalld && systemctl disable firewalld else echo "firewalld is off " fi zone=$(timedatectl |grep Asia/Shanghai) if [ $? != 0 ];then timedatectl set-timezone Asia/Shanghai else echo "Time zone configuration successful" fi rpm -qa |grep chrony if [ $? != 0 ];then yum -y install chrony && cp /etc/chrony.conf /etc/chrony.conf.bak sed -i '/^server/ s/^/#/' /etc/chrony.conf sed -i '2a server ntp.ntsc.ac.cn iburst' /etc/chrony.conf chronyc -a makestep else echo "chrony is sucess" fi id SHunicom if [ $? != 0 ];then useradd SHunicom && echo ShCX#9+2uc0$]80! |passwd --stdin SHunicom echo "SHunicom add ok" fi}zlic_install () { cd /root tar -vxf zlib-1.2.11.tar.gz cd zlib-1.2.11 ./configure --prefix=/usr/local/zlib make && make install echo " zlib install ok"}openssl_install () { cd /root tar -vxf openssl-1.1.1a.tar.gz >/dev/null cd openssl-1.1.1a ./config shared zlib --prefix=/usr/local/openssl make && make install mv /usr/bin/openssl /usr/bin/openssl.old mv /usr/include/openssl /usr/include/openssl.old ln -s /usr/local/openssl/bin/openssl /usr/bin/openssl ln -s /usr/local/openssl/include/openssl /usr/include/openssl echo "/usr/local/openssl/lib" >> /etc/ld.so.conf ldconfig -v}openssh_prepare () { yum -y install wget rpm -qa |grep wget wget_stat=$? ping -c 3 openbsd.hk ping_stat=$? if [[ $ping_stat -eq 0 ]] && [[ $wget_stat -eq 0 ]];then wget http://openbsd.hk/pub/OpenBSD/OpenSSH/portable/openssh-8.1p1.tar.gz wget "https://www.openssl.org/source/openssl-1.1.1a.tar.gz" wget http://www.zlib.net/zlib-1.2.11.tar.gz yum install -y gcc gcc-c++ glibc make autoconf openssl openssl-devel pcre-devel pam-devel tcp_wrappers-devel wget else echo -n -e "program: 'basename $wget_stat' openssh download faifled" fi ps -ef |grep sshd | grep -v grep ssh_stat=$? rpm -qa |grep openssh openssh_stat=$? if [[ $ssh_stat = 0 ]] && [[ $openssh_stat = 0 ]];then systemctl stop sshd rpm -qa |grep openssh |xargs -d "" rpm -e --nodeps mv /etc/init.d/sshd /etc/init.d/sshd.bak mv /etc/ssh /etc/ssh.bak elif [ $ssh_stat -eq 0 -a $openssh_stat -ne 0 ] ;then systemctl stop sshd mv /usr/local/openssh /usr/local/openssh.bak elif [ $ssh_stat -ne 0 -a $openssh_stat -ne 0 ] ;then mv /usr/local/openssh /usr/local/openssh.bak elif [ $ssh_stat -ne 0 -a $openssh_stat -eq 0 ] ;then rpm -qa |grep openssh |xargs -d "" rpm -e --nodeps mv /etc/init.d/sshd /etc/init.d/sshd.bak mv /etc/ssh /etc/ssh.bak fi}ubuntu_prepare () { echo "0" >/etc/apt-get/sources.list sed -i '1a deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse ' /etc/aptt/sources.list sed -i '1a deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb http://mirrors.aliyun.com/ubuntu/ xenial-proposed main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb-src http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb-src http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb-src http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb-src http://mirrors.aliyun.com/ubuntu/ xenial-proposed main restricted universe multiverse' /etc/apt/sources.list sed -i '1a deb-src http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse' /etc/apt/sources.list sudo apt-get install wget dpkg -s wget wget_stat=$? ping -c 3 openbsd.hk ping_stat=$? if [[ $ping_stat -eq 0 ]] && [[ $wget_stat -eq 0 ]];then wget http://openbsd.hk/pub/OpenBSD/OpenSSH/portable/openssh-8.1p1.tar.gz wget "https://www.openssl.org/source/openssl-1.1.1a.tar.gz" wget http://www.zlib.net/zlib-1.2.11.tar.gz sudo apt-get install wget gcc make zlib1g-dev libssl-dev libpam0g-dev sysv-rc-conf -y else echo -n -e "program: 'basename $wget_stat' openssh download faifled" fi ps -ef |grep sshd | grep -v grep ssh_stat=$? rpm -qa |grep openssh openssh_stat=$? if [[ $ssh_stat = 0 ]] && [[ $openssh_stat = 0 ]];then systemctl stop sshd mv /etc/init.d/sshd /etc/init.d/sshd.bak mv /etc/ssh /etc/ssh.bak elif [ $ssh_stat -eq 0 -a $openssh_stat -ne 0 ] ;then systemctl stop sshd mv /usr/local/openssh /usr/local/openssh.bak elif [ $ssh_stat -ne 0 -a $openssh_stat -ne 0 ] ;then mv /usr/local/openssh /usr/local/openssh.bak elif [ $ssh_stat -ne 0 -a $openssh_stat -eq 0 ] ;then mv /etc/init.d/sshd /etc/init.d/sshd.bak mv /etc/ssh /etc/ssh.bak fi} apt_get=$? if [ apt_get -eq 0 ];then wget http://openbsd.hk/pub/OpenBSD/OpenSSH/portable/openssh-8.1p1.tar.gz wget https://www.openssl.org/source/openssl-1.1.1a.tar.gz wget http://www.zlib.net/zlib-1.2.11.tar.gz fiopenssh_install () { cd /root tar -xvf openssh-8.1p1.tar.gz && /root > /dev/null cd openssh-8.1p1 var="$1" if [ "$var" = "cen6" ];then ./configure --prefix=/usr/local/openssh --sysconfdir=/etc/ssh --with-privsep-path=/var/lib/sshd --with-pam --with-ssl-dir=/usr/local/openssl -with-md5-passwords --without-hardening if [ $? = 0 ];then openssh_init else echo "system is $var , configure openssh failed " >>/install.log fi elif [ "$var" = "cen7" ];then ./configure --prefix=/usr/local/openssh --sysconfdir=/etc/ssh --with-md5-passwords --with-privsep-path=/var/lib/sshd --with-pam --with-ssl-dir=/usr/local/openssl if [ $? = 0 ];then openssh_init else echo "system is $var , configure openssh failed " >>/install.log fi fi}openssh_init () { make && make install cp $DIRSSH/contrib/redhat/sshd.init /etc/init.d/sshd sed -i '25,25s/SSHD=/usr/sbin/sshd/SSHD=/usr/local/openssh/sbin/sshd/' /etc/init.d/sshd sed -i '41,41s//usr/bin/ssh-keygen -A//usr/local/openssh/bin/ssh-keygen -A/' /etc/init.d/sshd chkconfig --add sshd && systemctl daemon-reload# sed -i 's/#Port 22/Port 22022/' /etc/ssh/sshd_config sed -i 's/#PermitRootLogin prohibit-password/PermitRootLogin yes/' /etc/ssh/sshd_config chmod 600 /etc/ssh/ssh_host_rsa_key /etc/ssh/ssh_host_ecdsa_key /etc/ssh/ssh_host_ed25519_key systemctl start sshd echo "export PATH=/usr/local/openssh/bin:$PATH" >> /etc/profile source /etc/profile}DIRZLIB='/usr/local/zlib'DIRSSL='/usr/local/openssl'DIRSSH='/root/openssh-8.1p1'INSTALLSSH='/usr/local/openssh'SYSSSH='/etc/ssh'array_number=(init centos6 centos7 ubuntu)echo -n -e "e[31;47m please input number 0.init 1.centos6 2.centos7 3.ubuntu please input number:e[30"read inputnumber=${array_number["$input"]} case "$number" in ${array_number[0]}) system_init ;; ${array_number[1]}) openssh_prepare zlic_install openssl_install openssh_install cen6 ;; ${array_number[2]}) openssh_prepare zlic_install openssl_install openssh_install cen7 ;; ${array_number[3]}) ubuntu_prepare zlic_install openssl_install openssh_install cen7 ;; *) echo "Usage: input number 0.init 1.centos6 2. centos7 3. ubuntu" exit 1 ;; esac

總結

以上是生活随笔為你收集整理的脚本升级_Openssh升级脚本的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。