TOPO搭建
拓撲搭建向導： http://ccie.ksu.ru/pdf/howto.virtual.voice.rack.pdf 路由器的配置文件： http://ccie.ksu.ru/pdf/ie.voice.topology.zip 拓撲搭建心得： 1.采用Dynamips搭建分布式平臺，4臺路由器在4臺PC上運行 HQ 2G RAM/Chicago 1G RAM/UK 1G RAM/PSTN 1G RAM 2.軟件版本： CCM4.1.2/Unity4.2.1 IOS為c3745-ipvoice_ivs-mz.124-2.T6，此IOS支持GK/GW/CME特性，而且可以添加4個以太網口 CIPC7.0，VTGO VMware5.3 workstation DynamipsGUI2.8_CN Windows XP Home Edition 3.Unity軟件： Win2003英文版_sql2000簡體中文_exchange2003簡體中文 4.很多UC軟件需要CCO下載權限 6.虛擬機可以做成VMware 文件，放在移動硬盤中運行 2008/02/01 1.dynagen不能在dell機器上運行
2.分布式FR不能在DELL上欲行，用SWITCH(3640)代替網云
3.選擇橋接到PC，選擇四個虛擬網卡，分別填寫PC1-PC4上虛擬網卡相關參數(不是physical NIC);啟用虛擬機時注意switch上的 range fa0/0 - 10-->no shut
4.ipblue安裝在RS1中的vmware,因為其voice GW都是與VMnet1綁定的
5.VTGO和CIPC7.0可以同時使用，新增一個LOOPBACK口，VTGO用loopback mac注冊，CIPC7.0用VMwarenet1注冊 topo說明
1.pc1 hosts Router_HQ? & sw1(模擬OSPF Area 0)+sw2(模擬EIGRP 1),CCM PUB is guested . PC1,Router_HQ綁定虛擬網卡VMnet1,Guest CCM網卡設置VMnet1(Host-only)并配置IP為10.1.1.100(GW:10.1.1.1)，Guest UNITY網卡設置VMnet1(Host-only)并配置IP為10.1.1.150(GW:10.1.1.1),Host OS上VMnet1網卡為10.1.1.254(無需GW)，打通host-guest系統中的橋梁 2.PC2 hosts Router_RS1,softphone is guested . PC2,Router_RS1綁定虛擬網卡VMnet1,Guest OS上的網卡為10.2.110.100(GW:10.2.110.1)，Host OS上VMnet1網卡為10.2.110.254(無需GW) 3.以上guest os中的網卡都要設置GW指向router的內網口 4.運行ospf&eigrp，確認從softphone OS可以ping通CCM
1.softip模擬Cisco 7961
2.SCCP
3.MAC 00032903984D VMware CCM4.2.1 administrator/cisco 只有C盤一個分區，分區至少20G
VMware unity??? localadmin/unity??? 只有C盤一個分區,分區至少20G 2009/02/01
安裝Unity
DNS-->AD-->Exchange2003簡體中文/SP3-->SQL2000簡體中文SP4
1.先裝DNS，配置正解區域和PTR，然后安裝dcpromo
2.log . to the nbsn.cn domain as localadmin,accessing shared drive . 在unity系統C盤創建一個tools文件夾，將unity cd1/cd3/cd5，CrystalReportEngine.msi，E3SP2CHS,SQL2KSP4，此文件不要放在桌面！！！
安裝UNITY時可以分配700M內存，硬盤容量至少20G
unity安裝出現的錯誤：
1.SQL版本過低問題
SQL2000補丁過低問題，下載中文SP4 for database
2.sentinel software錯誤，進入security直接安裝；
cisco workaround如下：
Workaround for Installing Cisco Unity by Using Terminal Services
When the Sentinel system driver is not installed . the Cisco Unity server before you try to run the Cisco Unity Setup program by using Terminal Services, the error message "While trying to install the Sentinel System Driver, Windows Installer returned a failure code: 3" appears. The Sentinel system driver cannot be installed by using Terminal Services. Install the driver by doing the following procedure . the Cisco Unity server before you run the Cisco Unity Setup program. To install the Sentinel system driver before you run Cisco Unity Setup by using Terminal Services
-------------------------------------------------------------------------------- Step 1 . the Cisco Unity server, insert Cisco Unity Disc 1 in the CD-ROM drive. Step 2 Browse to the Security Key Setup directory. Step 3 Double-click SentinelSystemDriver.msi. Step 4 Follow the .-screen prompts to complete installation of the Sentinel system driver. 3.unity和CCM集成錯誤
"Failed loading the MiuRegistry錯誤，關閉unity服務即可，成功安裝后再啟用
Error message displayed with text:
"Failed loading the MiuRegistry component. Error 0x8007005. Access is denied In order to use the Telephony Integration Manager your Windows account must be a Cisco Unity administrator and a member of the Administrators group . this computer."
Conditions:
Any version of Unity software installed . Windows 2003 operating system. Workaround:
Option 1. Stop the Unity services, UTIM launches without problem Option 2.
- Use Process Explorer (available from MS) to change the ownership and access to MTXMiuRegistryReadWrite object.
- Launch Process Explorer and select AvCsMgr.exe.
- In the bottom pane, locate Mutant object \BaseNamedObjects\MTXMiuRegistryReadWrite.
- Double click and change the security settings for this object so that the Local Administrators Group is the owner and has access.
- UTIM should now start. Additional Comments:
If the problem persists after a restart of Unity or the server, the local security policy likely overrides the default behavior and doesn't make the Administrators Group the default object owner. To change this, reassign the local (or DC) security policy, Security Option "System objects: Default owner for objects..." to Administrators.
On Windows 2003 "not defined" should act the same as Administrators.
Note this requires rebooting the Unity server??
?

轉載于:https://blog.51cto.com/cnahqmb/139153

總結

以上是生活随笔為你收集整理的Dynamips和Vmware完成CCVP试验(1)的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。