安裝Redis

下載最新的

官網：http://redis.io/? 或者? http://code.google.com/p/redis/downloads/list

第一步：下載安裝編譯

#wget http://redis.googlecode.com/files/redis-2.4.4.tar.gz
#tar zxvf redis-2.4.4.tar.gz
#cd redis-2.4.4
#make
#make install
#cp redis.conf? /etc/

第二步：修改配置

#vi /etc/redis.conf ? 配置見附錄 ?

第三步：啟動進程

#redis-server /etc/redis.conf

查看進程有沒有成功啟動 #ps -ef | grep redis? 測試輸入一個鍵值#redis-cli set test "123456"獲取鍵值#redis-cli get test??

關閉redis?
# redis-cli shutdown????? //關閉所有???
關閉某個端口上的redis???
# redis-cli -p 6397 shutdown? //關閉6397端口的redis??

說明：關閉以后緩存數據會自動dump到硬盤上，硬盤地址見redis.conf中的dbfilename? dump.rdb

?

PHP擴展

http://code.google.com/p/php-redis/

?附錄：無錯配置? ?下面是本人配置的全文件

# Redis configuration file example# Note on units: when memory size is needed, it is possible to specifiy
# it in the usual form of 1k 5GB 4M and so forth:
#
# 1k => 1000 bytes
# 1kb => 1024 bytes
# 1m => 1000000 bytes
# 1mb => 1024*1024 bytes
# 1g => 1000000000 bytes
# 1gb => 1024*1024*1024 bytes
#
# units are case insensitive so 1GB 1Gb 1gB are all the same.# By default Redis does not run as a daemon. Use 'yes' if you need it.
# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
daemonize yes# When running daemonized, Redis writes a pid file in /var/run/redis.pid by
# default. You can specify a custom pid file location here.
pidfile /var/run/redis.pid# Accept connections on the specified port, default is 6379.
# If port 0 is specified Redis will not listen on a TCP socket.
port 6379# If you want you can bind a single interface, if the bind option is not
# specified all the interfaces will listen for incoming connections.
#bind 127.0.0.1# Specify the path for the unix socket that will be used to listen for
# incoming connections. There is no default, so Redis will not listen
# on a unix socket when not specified.
#
# unixsocket /tmp/redis.sock
# unixsocketperm 755# Close the connection after a client is idle for N seconds (0 to disable)
timeout 600# Set server verbosity to 'debug'
# it can be one of:
# debug (a lot of information, useful for development/testing)
# verbose (many rarely useful info, but not a mess like the debug level)
# notice (moderately verbose, what you want in production probably)
# warning (only very important / critical messages are logged)
loglevel verbose# Specify the log file name. Also 'stdout' can be used to force
# Redis to log on the standard output. Note that if you use standard
# output for logging but daemonize, logs will be sent to /dev/null
logfile stdout# To enable logging to the system logger, just set 'syslog-enabled' to yes,
# and optionally update the other syslog parameters to suit your needs.
# syslog-enabled no# Specify the syslog identity.
# syslog-ident redis# Specify the syslog facility.  Must be USER or between LOCAL0-LOCAL7.
# syslog-facility local0# Set the number of databases. The default database is DB 0, you can select
# a different one on a per-connection basis using SELECT <dbid> where
# dbid is a number between 0 and 'databases'-1
databases 16################################ SNAPSHOTTING  #################################
#
# Save the DB on disk:
#
#   save <seconds> <changes>
#
#   Will save the DB if both the given number of seconds and the given
#   number of write operations against the DB occurred.
#
#   In the example below the behaviour will be to save:
#   after 900 sec (15 min) if at least 1 key changed
#   after 300 sec (5 min) if at least 10 keys changed
#   after 60 sec if at least 10000 keys changed
#
#   Note: you can disable saving at all commenting all the "save" lines.save 900 1
save 300 10
save 60 10000# Compress string objects using LZF when dump .rdb databases?
# For default that's set to 'yes' as it's almost always a win.
# If you want to save some CPU in the saving child set it to 'no' but
# the dataset will likely be bigger if you have compressible values or keys.
rdbcompression yes# The filename where to dump the DB
dbfilename dump.rdb# The working directory.
#
# The DB will be written inside this directory, with the filename specified
# above using the 'dbfilename' configuration directive.
# 
# Also the Append Only File will be created inside this directory.
# 
# Note that you must specify a directory here, not a file name.
dir /usr/local/redis-2.4.4

################################# REPLICATION ################################## Master-Slave replication. Use slaveof to make a Redis instance a copy of
# another Redis server. Note that the configuration is local to the slave
# so for example it is possible to configure the slave to save the DB with a
# different interval, or to listen to another port, and so on.
#
# slaveof <masterip> <masterport># If the master is password protected (using the "requirepass" configuration
# directive below) it is possible to tell the slave to authenticate before
# starting the replication synchronization process, otherwise the master will
# refuse the slave request.
#
# masterauth <master-password># When a slave lost the connection with the master, or when the replication
# is still in progress, the slave can act in two different ways:
#
# 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
#    still reply to client requests, possibly with out of data data, or the
#    data set may just be empty if this is the first synchronization.
#
# 2) if slave-serve-stale data is set to 'no' the slave will reply with
#    an error "SYNC with master in progress" to all the kind of commands
#    but to INFO and SLAVEOF.
#
slave-serve-stale-data yes################################## SECURITY #################################### Require clients to issue AUTH <PASSWORD> before processing any other
# commands.  This might be useful in environments in which you do not trust
# others with access to the host running redis-server.
#
# This should stay commented out for backward compatibility and because most
# people do not need auth (e.g. they run their own servers).
# 
# Warning: since Redis is pretty fast an outside user can try up to
# 150k passwords per second against a good box. This means that you should
# use a very strong password otherwise it will be very easy to break.
#
# requirepass foobared# Command renaming.
#
# It is possilbe to change the name of dangerous commands in a shared
# environment. For instance the CONFIG command may be renamed into something
# of hard to guess so that it will be still available for internal-use
# tools but not available for general clients.
#
# Example:
#
# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
#
# It is also possilbe to completely kill a command renaming it into
# an empty string:
#
# rename-command CONFIG ""################################### LIMITS ##################################### Set the max number of connected clients at the same time. By default there
# is no limit, and it's up to the number of file descriptors the Redis process
# is able to open. The special value '0' means no limits.
# Once the limit is reached Redis will close all the new connections sending
# an error 'max number of clients reached'.
#
# maxclients 128# Don't use more memory than the specified amount of bytes.
# When the memory limit is reached Redis will try to remove keys with an
# EXPIRE set. It will try to start freeing keys that are going to expire
# in little time and preserve keys with a longer time to live.
# Redis will also try to remove objects from free lists if possible.
#
# If all this fails, Redis will start to reply with errors to commands
# that will use more memory, like SET, LPUSH, and so on, and will continue
# to reply to most read-only commands like GET.
#
# WARNING: maxmemory can be a good idea mainly if you want to use Redis as a
# 'state' server or cache, not as a real DB. When Redis is used as a real
# database the memory usage will grow over the weeks, it will be obvious if
# it is going to use too much memory in the long run, and you'll have the time
# to upgrade. With maxmemory after the limit is reached you'll start to get
# errors for write operations, and this may even lead to DB inconsistency.
#
# maxmemory <bytes># MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
# is reached? You can select among five behavior:
# 
# volatile-lru -> remove the key with an expire set using an LRU algorithm
# allkeys-lru -> remove any key accordingly to the LRU algorithm
# volatile-random -> remove a random key with an expire set
# allkeys->random -> remove a random key, any key
# volatile-ttl -> remove the key with the nearest expire time (minor TTL)
# noeviction -> don't expire at all, just return an error on write operations
# 
# Note: with all the kind of policies, Redis will return an error on write
#       operations, when there are not suitable keys for eviction.
#
#       At the date of writing this commands are: set setnx setex append
#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
#       getset mset msetnx exec sort
#
# The default is:
#
# maxmemory-policy volatile-lru# LRU and minimal TTL algorithms are not precise algorithms but approximated
# algorithms (in order to save memory), so you can select as well the sample
# size to check. For instance for default Redis will check three keys and
# pick the one that was used less recently, you can change the sample size
# using the following configuration directive.
#
# maxmemory-samples 3############################## APPEND ONLY MODE ################################ By default Redis asynchronously dumps the dataset on disk. If you can live
# with the idea that the latest records will be lost if something like a crash
# happens this is the preferred way to run Redis. If instead you care a lot
# about your data and don't want to that a single record can get lost you should
# enable the append only mode: when this mode is enabled Redis will append
# every write operation received in the file appendonly.aof. This file will
# be read on startup in order to rebuild the full dataset in memory.
#
# Note that you can have both the async dumps and the append only file if you
# like (you have to comment the "save" statements above to disable the dumps).
# Still if append only mode is enabled Redis will load the data from the
# log file at startup ignoring the dump.rdb file.
#
# IMPORTANT: Check the BGREWRITEAOF to check how to rewrite the append
# log file in background when it gets too big.appendonly yes# The name of the append only file (default: "appendonly.aof")appendfilename appendonly.aof# The fsync() call tells the Operating System to actually write data on disk
# instead to wait for more data in the output buffer. Some OS will really flush 
# data on disk, some other OS will just try to do it ASAP.
#
# Redis supports three different modes:
#
# no: don't fsync, just let the OS flush the data when it wants. Faster.
# always: fsync after every write to the append only log . Slow, Safest.
# everysec: fsync only if one second passed since the last fsync. Compromise.
#
# The default is "everysec" that's usually the right compromise between
# speed and data safety. It's up to you to understand if you can relax this to
# "no" that will will let the operating system flush the output buffer when
# it wants, for better performances (but if you can live with the idea of
# some data loss consider the default persistence mode that's snapshotting),
# or on the contrary, use "always" that's very slow but a bit safer than
# everysec.
#
# If unsure, use "everysec".# appendfsync always
appendfsync everysec
# appendfsync no# When the AOF fsync policy is set to always or everysec, and a background
# saving process (a background save or AOF log background rewriting) is
# performing a lot of I/O against the disk, in some Linux configurations
# Redis may block too long on the fsync() call. Note that there is no fix for
# this currently, as even performing fsync in a different thread will block
# our synchronous write(2) call.
#
# In order to mitigate this problem it's possible to use the following option
# that will prevent fsync() from being called in the main process while a
# BGSAVE or BGREWRITEAOF is in progress.
#
# This means that while another child is saving the durability of Redis is
# the same as "appendfsync none", that in pratical terms means that it is
# possible to lost up to 30 seconds of log in the worst scenario (with the
# default Linux settings).
# 
# If you have latency problems turn this to "yes". Otherwise leave it as
# "no" that is the safest pick from the point of view of durability.
no-appendfsync-on-rewrite no# Automatic rewrite of the append only file.
# Redis is able to automatically rewrite the log file implicitly calling
# BGREWRITEAOF when the AOF log size will growth by the specified percentage.
# 
# This is how it works: Redis remembers the size of the AOF file after the
# latest rewrite (or if no rewrite happened since the restart, the size of
# the AOF at startup is used).
#
# This base size is compared to the current size. If the current size is
# bigger than the specified percentage, the rewrite is triggered. Also
# you need to specify a minimal size for the AOF file to be rewritten, this
# is useful to avoid rewriting the AOF file even if the percentage increase
# is reached but it is still pretty small.
#
# Specify a precentage of zero in order to disable the automatic AOF
# rewrite feature.auto-aof-rewrite-percentage 100
auto-aof-rewrite-min-size 64mb################################## SLOW LOG #################################### The Redis Slow Log is a system to log queries that exceeded a specified
# execution time. The execution time does not include the I/O operations
# like talking with the client, sending the reply and so forth,
# but just the time needed to actually execute the command (this is the only
# stage of command execution where the thread is blocked and can not serve
# other requests in the meantime).
# 
# You can configure the slow log with two parameters: one tells Redis
# what is the execution time, in microseconds, to exceed in order for the
# command to get logged, and the other parameter is the length of the
# slow log. When a new command is logged the oldest one is removed from the
# queue of logged commands.# The following time is expressed in microseconds, so 1000000 is equivalent
# to one second. Note that a negative number disables the slow log, while
# a value of zero forces the logging of every command.
slowlog-log-slower-than 10000# There is no limit to this length. Just be aware that it will consume memory.
# You can reclaim memory used by the slow log with SLOWLOG RESET.
slowlog-max-len 1024################################ VIRTUAL MEMORY ################################## WARNING! Virtual Memory is deprecated in Redis 2.4
### The use of Virtual Memory is strongly discouraged.# Virtual Memory allows Redis to work with datasets bigger than the actual
# amount of RAM needed to hold the whole dataset in memory.
# In order to do so very used keys are taken in memory while the other keys
# are swapped into a swap file, similarly to what operating systems do
# with memory pages.
#
# To enable VM just set 'vm-enabled' to yes, and set the following three
# VM parameters accordingly to your needs.vm-enabled no#vm-enabled yes# This is the path of the Redis swap file. As you can guess, swap files
# can't be shared by different Redis instances, so make sure to use a swap
# file for every redis process you are running. Redis will complain if the
# swap file is already in use.
#
# The best kind of storage for the Redis swap file (that's accessed at random) 
# is a Solid State Disk (SSD).
#
# *** WARNING *** if you are using a shared hosting the default of putting
# the swap file under /tmp is not secure. Create a dir with access granted
# only to Redis user and configure Redis to create the swap file there.
vm-swap-file /tmp/redis.swap# vm-max-memory configures the VM to use at max the specified amount of
# RAM. Everything that deos not fit will be swapped on disk *if* possible, that
# is, if there is still enough contiguous space in the swap file.
#
# With vm-max-memory 0 the system will swap everything it can. Not a good
# default, just specify the max amount of RAM you can in bytes, but it's
# better to leave some margin. For instance specify an amount of RAM
# that's more or less between 60 and 80% of your free RAM.
vm-max-memory 0# Redis swap files is split into pages. An object can be saved using multiple
# contiguous pages, but pages can't be shared between different objects.
# So if your page is too big, small objects swapped out on disk will waste
# a lot of space. If you page is too small, there is less space in the swap
# file (assuming you configured the same number of total swap file pages).
#
# If you use a lot of small objects, use a page size of 64 or 32 bytes.
# If you use a lot of big objects, use a bigger page size.
# If unsure, use the default :)
vm-page-size 32# Number of total memory pages in the swap file.
# Given that the page table (a bitmap of free/used pages) is taken in memory,
# every 8 pages on disk will consume 1 byte of RAM.
#
# The total swap size is vm-page-size * vm-pages
#
# With the default of 32-bytes memory pages and 134217728 pages Redis will
# use a 4 GB swap file, that will use 16 MB of RAM for the page table.
#
# It's better to use the smallest acceptable value for your application,
# but the default is large in order to work in most conditions.
vm-pages 134217728# Max number of VM I/O threads running at the same time.
# This threads are used to read/write data from/to swap file, since they
# also encode and decode objects from disk to memory or the reverse, a bigger
# number of threads can help with big objects even if they can't help with
# I/O itself as the physical device may not be able to couple with many
# reads/writes operations at the same time.
#
# The special value of 0 turn off threaded I/O and enables the blocking
# Virtual Memory implementation.
vm-max-threads 4############################### ADVANCED CONFIG ################################ Hashes are encoded in a special way (much more memory efficient) when they
# have at max a given numer of elements, and the biggest element does not
# exceed a given threshold. You can configure this limits with the following
# configuration directives.
hash-max-zipmap-entries 512
hash-max-zipmap-value 64# Similarly to hashes, small lists are also encoded in a special way in order
# to save a lot of space. The special representation is only used when
# you are under the following limits:
list-max-ziplist-entries 512
list-max-ziplist-value 64# Sets have a special encoding in just one case: when a set is composed
# of just strings that happens to be integers in radix 10 in the range
# of 64 bit signed integers.
# The following configuration setting sets the limit in the size of the
# set in order to use this special memory saving encoding.
set-max-intset-entries 512# Similarly to hashes and lists, sorted sets are also specially encoded in
# order to save a lot of space. This encoding is only used when the length and
# elements of a sorted set are below the following limits:
zset-max-ziplist-entries 128
zset-max-ziplist-value 64# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
# order to help rehashing the main Redis hash table (the one mapping top-level
# keys to values). The hash table implementation redis uses (see dict.c)
# performs a lazy rehashing: the more operation you run into an hash table
# that is rhashing, the more rehashing "steps" are performed, so if the
# server is idle the rehashing is never complete and some more memory is used
# by the hash table.
# 
# The default is to use this millisecond 10 times every second in order to
# active rehashing the main dictionaries, freeing memory when possible.
#
# If unsure:
# use "activerehashing no" if you have hard latency requirements and it is
# not a good thing in your environment that Redis can reply form time to time
# to queries with 2 milliseconds delay.
#
# use "activerehashing yes" if you don't have such hard requirements but
# want to free memory asap when possible.
activerehashing yes################################## INCLUDES #################################### Include one or more other config files here.  This is useful if you
# have a standard template that goes to all redis server but also need
# to customize a few per-server settings.  Include files can include
# other files, so use this wisely.
#
# include /path/to/local.conf
# include /path/to/other.conf

中文說明：

1,是否以后臺進程運行，默認為no
daemonize no

2,如以后臺進程運行，則需指定一個pid，默認為/var/run/redis.pid
pidfile /var/run/redis.pid

3,監聽端口，默認為6379
port 6379

4,綁定主機IP，默認值為127.0.0.1（注釋）
bind 127.0.0.1

5,超時時間，默認為300（秒）
timeout 300

6,日志記錄等級，有4個可選值，debug，verbose（默認值），notice，warning
loglevel verbose

7,日志記錄方式，默認值為stdout
logfile stdout

8,可用數據庫數，默認值為16，默認數據庫為0
databases 16

9,指出在多長時間內，有多少次更新操作，就將數據同步到數據文件。這個可以多個條件配合，比如默認配置文件中的設置，就設置了三個條件。

900秒（15分鐘）內至少有1個key被改變
save 900 1
300秒（5分鐘）內至少有10個key被改變
save 300 10

10,存儲至本地數據庫時是否壓縮數據，默認為yes
rdbcompression yes

11,本地數據庫文件名，默認值為dump.rdb
dbfilename /root/redis_db/dump.rdb

12,本地數據庫存放路徑，默認值為 ./
dir /root/redis_db/

13,當本機為從服務時，設置主服務的IP及端口（注釋）
slaveof <masterip> <masterport>

14,當本機為從服務時，設置主服務的連接密碼（注釋）
masterauth <master-password>

15,連接密碼（注釋）
requirepass foobared

16,最大客戶端連接數，默認不限制（注釋）
maxclients 128

17,設置最大內存，達到最大內存設置后，Redis會先嘗試清除已到期或即將到期的Key，當此方法處理后，任到達最大內存設置，將無法再進行寫入操作。（注釋）
maxmemory <bytes>

18,是否在每次更新操作后進行日志記錄，如果不開啟，可能會在斷電時導致一段時間內的數據丟失。因為redis本身同步數據文件是按上面save條件來同步的，所以有的數據會在一段時間內只存在于內存中。默認值為no
appendonly yes

19,更新日志文件名，默認值為appendonly.aof（注釋）
appendfilename /root/redis_db/appendonly.aof

20,更新日志條件，共有3個可選值。no表示等操作系統進行數據緩存同步到磁盤，always表示每次更新操作后手動調用fsync()將數據寫到磁盤，everysec表示每秒同步一次（默認值）。
appendfsync everysec

21,是否使用虛擬內存，默認值為no
vm-enabled yes

22,虛擬內存文件路徑，默認值為/tmp/redis.swap，不可多個Redis實例共享
vm-swap-file /tmp/redis.swap

23,將所有大于vm-max-memory的數據存入虛擬內存,無論vm-max-memory設置多小,所有索引數據都是內存存儲的 (Redis的索引數據就是keys),也就是說,當vm-max-memory設置為0的時候,其實是所有value都存在于磁盤。默認值為0。
vm-max-memory 0

24,虛擬內存文件以塊存儲，每塊32bytes
vm-page-size 32

25,虛擬內在文件的最大數
vm-pages 134217728

26,可以設置訪問swap文件的線程數,設置最好不要超過機器的核數,如果設置為0,那么所有對swap文件的操作都是串行的.可能會造成比較長時間的延遲,但是對數據完整性有很好的保證.
vm-max-threads 4

27,把小的輸出緩存放在一起，以便能夠在一個TCP packet中為客戶端發送多個響應，具體原理和真實效果我不是很清楚。所以根據注釋，你不是很確定的時候就設置成yes
glueoutputbuf yes

28,在redis 2.0中引入了hash數據結構。當hash中包含超過指定元素個數并且最大的元素沒有超過臨界時，hash將以一種特殊的編碼方式（大大減少內存使用）來存儲，這里可以設置這兩個臨界值
hash-max-zipmap-entries 64

29,hash中一個元素的最大值
hash-max-zipmap-value 512

30,開啟之后，redis將在每100毫秒時使用1毫秒的CPU時間來對redis的hash表進行重新hash，可以降低內存的使用。當你的使 用場景中，有非常嚴格的實時性需要，不能夠接受Redis時不時的對請求有2毫秒的延遲的話，把這項配置為no。如果沒有這么嚴格的實時性要求，可以設置 為yes，以便能夠盡可能快的釋放內存
activerehashing yes

?

可以參考：

Redis的部署使用文檔 ?http://www.elain.org/?p=505

========================================================

安裝PHP的Redis擴展

?

先去下載https://github.com/nicolasff/phpredis/downloads

#wget https://github.com/nicolasff/phpredis/downloads

# tar -zxvf nicolasff-phpredis-2.1.3-124-gd4ad907.tar.gz
# mv nicolasff-phpredis-d4ad907 php-5.3.8/ext/phpredis/
# cd php-5.3.8/ext/phpredis/
# /usr/local/php/bin/phpize
# ./configure --with-php-config=/usr/local/php/bin/php-config
# make && make install

?

配置php.ini

vi /usr/local/php/lib/php.ini
(加入:
extension=redis.so
)
先要看看有沒有extension_dir=/…….
重啟apache或者nginx

# /usr/local/apache2/bin/apachectl restart

?

測試代碼：

<?php$redis = new Redis();$redis->connect('127.0.0.1',6379);$redis->set('test','hello world!');echo $redis->get('test');?>

?

?

參考：

Linux(CentOS 5.5) Redis 安裝及RedisPHP拓展安裝應用

http://www.linuxidc.com/Linux/2011-08/41404.htm
?

安裝redis和phpredis模塊

http://skandgjxa.blog.163.com/blog/static/14152982011712112933816/

?

RHEL5下編譯安裝Redis及其PHP擴展庫

http://hi.baidu.com/zjstandup/blog/item/9f38b825d379c96c35a80f7f.html

?

總結

以上是生活随笔為你收集整理的Redis以及Redis的php扩展安装无错版的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。