這是我第一次嘗試設置一些虛擬機。 我正在嘗試rdp給他們，但我遇到了這個錯誤

This is my first attempt in setting up some VMs. I am trying to rdp to them but I'm encountering this error

**遠程桌面無法找到計算機"\[服務器\]"。 這可能意味著"\[服務器\]"。 不屬于指定的網絡。 驗證您嘗試連接的計算機名稱和域。**

**Remote Desktop can't find the computer "\[Server\]". This might mean that "\[Server\]" does not belong to the specified network. Verify the computer name and domain that you are trying to connect to.**

我正在嘗試設置一些開發服務器。 我在Hyper-V中創建了6臺機器，1臺域控制器和5臺成員服務器。

I am trying to set up some dev servers. I have made 6 machines in Hyper-V, 1 domain controller and 5 member servers.

所有正在運行的Windows Server 2008 R2 SP1。 全部在域名上(稱之為"d.com")。

All running Windows Server 2008 R2 SP1. All on a domain (call it "d.com").

我創建了一個內部虛擬交換機，配置如下：

I have created an Internal virtual switch, configuring it as follows:

* IPv4地址= 198.168.10.1

* 子網掩碼= 255.255.255.0

* DNS服務器= 198.168.10.1

* IPv4 Address = 198.168.10.1

* Subnet Mask = 255.255.255.0

* DNS Server = 198.168.10.1

對于域控制器(稱之為"DC")和第一個成員服務器(稱之為"S1")，我啟用了遠程桌面，允許來自運行[這個](https：/之后的任何版本的計算機的連接 /briantjackett.com/2010/06/06/how-to-configure-remote-desktop-to-hyper-v-guest-virtual-machines/)鏈接的說明。 我確實將此指令中列出的服務設置為自動啟動：

For the Domain Controller (call it "DC") and the first member server (call it "S1"), I enabled Remote Desktop allowing for connections from computers running any version following [this](https://briantjackett.com/2010/06/06/how-to-configure-remote-desktop-to-hyper-v-guest-virtual-machines/) link's instructions. I did set the services listed in this instruction to start automatically:

* DNS客戶端(已自動)

* 功能發現資源發布

* SSDP Discovery

* UPnP設備主機

* DNS Client (already automatic)

* Function Discovery Resource Publication

* SSDP Discovery

* UPnP Device Host

我能夠ping上面給出的IP。 我通過在S1中禁用防火墻并嘗試rdp檢查是否存在防火墻問題，但遇到了同樣的錯誤。

I'm able to ping the IP given above. I checked to see if it's a firewall issue by disabling the firewall in S1 and attempted to rdp but was met with the same error.

昨天當我第一次把它全部搞定時，我能夠rdp，但今天沒有這樣的運氣。 當我啟動機器時，我確實發現SSDP Discovery服務還沒有啟動，但即使啟動它也無法解決問題。

Wierdly I was able to rdp yesterday when I first set it all up, but today no such luck. I did spot that the SSDP Discovery service had not started when I spun up the machine, but even starting that did not resolve the issue.

我缺少一些配置嗎？ 我錯誤配置了什么嗎？

Is there some configuration I'm missing? Have I misconfigured something?

* * *

* * *

**編輯：已解決**

**EDIT: RESOLVED**

我修改了內部交換機的IP配置，在與VM相同的子網上為其提供了一個IP，具有適當?shù)淖泳W(wǎng)掩碼和默認網關(同樣在同一子網上)。 我還刪除了DNS服務器地址。

I amended the IP config of the internal switch, giving it an IP on the same subnet as the VMs, with appropriate subnet mask, and a default gateway (again on the same subnet). I have also removed the DNS server address.

我現在可以從主機ping和遠程桌面我的虛擬機。

I am now able to ping and remote desktop my VMs from the host machine.

總結

以上是生活随笔為你收集整理的远程桌面无法找到计算机不属于指定网络,远程桌面找不到计算机的全部內容，希望文章能夠幫你解決所遇到的問題。

如果覺得生活随笔網站內容還不錯，歡迎將生活随笔推薦給好友。